vs.

      Caterpillar 775D vs. Hitachi EH1600

      5 reasons to buy Caterpillar 775D:

      Weight

      Loaded front weight distribution 33.3 % and 33 % 1 % more or 0.3 %

      Operation

      Differential/final drive fluid volume 155 l. and 140.1 l. 10 % more or 14.9 l.

      Gear box

      Maximum speed 65.8 km/h and 58.6 km/h 11 % more or 7.2 km/h
      Forward gears number 7 and 6 14 % more or 1

      Dump

      Lifting time 9.5 sec and 12.8 sec 26 % less or 3.3 sec

      16 reasons to buy Hitachi EH1600:

      Weight

      Loaded rear weight distribution 67 % and 66.7 % 0 % more or 0.3 %

      Sizes

      Clearance 890 mm and 600 mm 33 % more or 290 mm
      Unloading ground clearance 810 mm and 660 mm 19 % more or 150 mm

      Operation

      Fuel Capacity 1003 l. and 700 l. 30 % more or 303 l.
      Cooling system fluid volume 268.7 l. and 151 l. 44 % more or 117.7 l.
      Engine oil volume 140 l. and 68 l. 51 % more or 72 l.
      Steering system fluid volume 117 l. and 60 l. 49 % more or 57 l.
      Brake / lift system fluid volume 318 l. and 307 l. 3 % more or 11 l.
      Generator current strength 100 amperes and 50 amperes 50 % more or 50 amperes

      Motor

      Power measured at 2100 rev / min and 2000 rev / min 5 % more or 100 rev
      Displacement 30.5 l. and 27 l. 11 % more or 3.5 l.
      Full power 783 kW and 540.6 kW 31 % more or 242.4 kW
      Effective power 732 kW and 516.8 kW 29 % more or 215.2 kW

      Dump

      Brimmed lifting capacity 35.4 m3 and 31.4 m3 11 % more or 4.0 m3
      Lifting capacity with top 57.1 m3 and 41.5 m3 27 % more or 15.6 m3
      Lowering time 12.1 sec and 12.5 sec 3 % less or 0.4 sec

      Neutral reasons:

      Weight

      Weight without load 43227.4 kg and 70920 kg
      Laden weight 106594.2 kg and 160664 kg

      Sizes

      Unloading height 8800 mm and 9780 mm
      Dimensional length 9700 mm and 10110 mm
      Overall width 3970 mm and 5890 mm
      Headroom 4410 mm and 5310 mm
      Wheelbase 4190 mm and 4570 mm

      Operation

      Operating voltage 24 V and 24 V
      Tyre size 24.00-R35 and 27.00R49 E4 Radial

      Motor

      Cylinders number 12 and 12
      Aspiration Turbocharging with subsequent air cooling (by a cooling radiator) and Turbocharging with subsequent air cooling (by a cooling radiator)
      Manufacturer Caterpillar and Cummins
      Model 3412ETA and QST 30

      Gear box

      Reverse gears number 1 and 1
      Transmission type powershift and Allison DP-8963, planetary type, automatic gear change. Built-in torque converter with automatic lock gear changes in all ranges.

      Dump

      Nominal payload 63366.9 kg and 88904.1 kg
      Discharge angle 60 degrees and 62 degrees

      Images

      Sizes

      1. Dimensional length 9700 mm 1. Dimensional length 10110 mm
      2. Overall width 3970 mm 2. Overall width 5890 mm
      3. Headroom 4410 mm 3. Headroom 5310 mm
      4. Wheelbase 4190 mm 4. Wheelbase 4570 mm
      5. Clearance 600 mm 5. Clearance 890 mm
      6. Unloading height 8800 mm 6. Unloading height 9780 mm
      7. Unloading ground clearance 660 mm 7. Unloading ground clearance 810 mm

      Dump

      8. Discharge angle 60 degrees 8. Discharge angle 62 degrees