vs.

      Caterpillar 775D vs. Hitachi EH4500-2

      4 reasons to buy Caterpillar 775D:

      Weight

      Unloaded rear weight distribution 52.7 % and 49.8 % 6 % more or 2.9 %

      Motor

      Power measured at 2000 rev / min and 1900 rev / min 5 % more or 100 rev

      Dump

      Lifting time 9.5 sec and 22 sec 57 % less or 12.5 sec
      Lowering time 12.5 sec and 24 sec 48 % less or 11.5 sec

      19 reasons to buy Hitachi EH4500-2:

      Weight

      Loaded rear weight distribution 67 % and 66.7 % 0 % more or 0.3 %
      Unloaded front weight distribution 50.2 % and 47.3 % 6 % more or 2.9 %
      Loaded front weight distribution 34 % and 33.3 % 2 % more or 0.7 %

      Sizes

      Clearance 970 mm and 600 mm 38 % more or 370 mm
      Unloading ground clearance 1970 mm and 660 mm 66 % more or 1310 mm

      Operation

      Fuel Capacity 3785 l. and 700 l. 82 % more or 3085 l.
      Cooling system fluid volume 697 l. and 151 l. 78 % more or 546 l.
      Engine oil volume 242 l. and 68 l. 72 % more or 174 l.
      Differential/final drive fluid volume 223 l. and 155 l. 30 % more or 68 l.
      Steering system fluid volume 291 l. and 60 l. 79 % more or 231 l.
      Brake / lift system fluid volume 965 l. and 307 l. 68 % more or 658 l.
      Generator current strength 260 amperes and 50 amperes 81 % more or 210 amperes

      Motor

      Cylinders number 16 and 12 25 % more or 4
      Full power 2014 kW and 540.6 kW 73 % more or 1473.4 kW
      Effective power 1939 kW and 516.8 kW 73 % more or 1422.2 kW
      Displacement 65 l. and 27 l. 58 % more or 38 l.

      Gear box

      Maximum speed 66.9 km/h and 65.8 km/h 2 % more or 1.1 km/h

      Dump

      Brimmed lifting capacity 108 m3 and 31.4 m3 71 % more or 76.6 m3
      Lifting capacity with top 159 m3 and 41.5 m3 74 % more or 117.5 m3

      Neutral reasons:

      Weight

      Weight without load 43227.4 kg and 198096 kg
      Laden weight 106594.2 kg and 480362 kg

      Sizes

      Unloading height 8800 mm and 14300 mm
      Dimensional length 9700 mm and 14300 mm
      Overall width 3970 mm and 9050 mm
      Headroom 4410 mm and 7240 mm
      Wheelbase 4190 mm and 6150 mm

      Operation

      Operating voltage 24 V and 24 V
      Tyre size 24.00-R35 and 50.90R57 E4 Radial

      Motor

      Aspiration Turbocharging with subsequent air cooling (by a cooling radiator) and Turbocharged engine and the subsequent air cooling to a low temperature
      Manufacturer Caterpillar and Detroit diesel
      Model 3412ETA and DDEC IV 16V-4000

      Dump

      Nominal payload 63366.9 kg and 281227.3 kg
      Discharge angle 60 degrees and 58 degrees

      Images

      Sizes

      7. Unloading ground clearance 660 mm 7. Unloading ground clearance 1970 mm
      1. Dimensional length 9700 mm 1. Dimensional length 14300 mm
      2. Overall width 3970 mm 2. Overall width 9050 mm
      3. Headroom 4410 mm 3. Headroom 7240 mm
      4. Wheelbase 4190 mm 4. Wheelbase 6150 mm
      5. Clearance 600 mm 5. Clearance 970 mm
      6. Unloading height 8800 mm 6. Unloading height 14300 mm

      Dump

      8. Discharge angle 60 degrees 8. Discharge angle 58 degrees