- Home/
- Comparison/
- Mining Dump Truck/
- Caterpillar 775D vs. Hitachi EH5000
Caterpillar 775D vs. Hitachi EH5000
5 reasons to buy Caterpillar 775D:
Weight
Unloaded rear weight distribution | 52.7 % and 51 % | 3 % more or 1.7 % |
Loaded front weight distribution | 33.3 % and 32 % | 4 % more or 1.3 % |
Motor
Power measured at | 2000 rev / min and 1900 rev / min | 5 % more or 100 rev |
Dump
Lifting time | 9.5 sec and 22 sec | 57 % less or 12.5 sec |
Lowering time | 12.5 sec and 24 sec | 48 % less or 11.5 sec |
19 reasons to buy Hitachi EH5000:
Weight
Unloaded front weight distribution | 51 % and 47.3 % | 7 % more or 3.7 % |
Loaded rear weight distribution | 68 % and 66.7 % | 2 % more or 1.3 % |
Sizes
Unloading ground clearance | 1860 mm and 660 mm | 65 % more or 1200 mm |
Clearance | 910 mm and 600 mm | 34 % more or 310 mm |
Operation
Generator current strength | 260 amperes and 50 amperes | 81 % more or 210 amperes |
Fuel Capacity | 3785 l. and 700 l. | 82 % more or 3085 l. |
Cooling system fluid volume | 697 l. and 151 l. | 78 % more or 546 l. |
Engine oil volume | 242 l. and 68 l. | 72 % more or 174 l. |
Steering system fluid volume | 291 l. and 60 l. | 79 % more or 231 l. |
Brake / lift system fluid volume | 965 l. and 307 l. | 68 % more or 658 l. |
Motor
Cylinders number | 16 and 12 | 25 % more or 4 |
Full power | 2014 kW and 540.6 kW | 73 % more or 1473.4 kW |
Effective power | 1939 kW and 516.8 kW | 73 % more or 1422.2 kW |
Displacement | 65 l. and 27 l. | 58 % more or 38 l. |
Maximum torque | 10930.6 Nm and 2757.7 Nm | 75 % more or 8172.9 Nm |
Torque measured at | 1500 rev / min and 1200 rev / min | 20 % more or 300 rev |
Gear box
Maximum speed | 66.9 km/h and 65.8 km/h | 2 % more or 1.1 km/h |
Dump
Brimmed lifting capacity | 143.6 m3 and 31.4 m3 | 78 % more or 112.2 m3 |
Lifting capacity with top | 196.1 m3 and 41.5 m3 | 79 % more or 154.6 m3 |
Neutral reasons:
Weight
Laden weight | 106594.2 kg and 528208 kg |
Weight without load | 43227.4 kg and 213185 kg |
Sizes
Unloading height | 8800 mm and 14280 mm |
Dimensional length | 9700 mm and 14420 mm |
Overall width | 3970 mm and 9050 mm |
Headroom | 4410 mm and 7170 mm |
Wheelbase | 4190 mm and 6150 mm |
Operation
Operating voltage | 24 V and 24 V |
Tyre size | 24.00-R35 and 53/80R63 E4 Radial |
Motor
Aspiration | Turbocharging with subsequent air cooling (by a cooling radiator) and Turbocharged engine and the subsequent air cooling to a low temperature |
Manufacturer | Caterpillar and Detroit diesel |
Model | 3412ETA and DDEC IV 16V-4000 |
Dump
Nominal payload | 63366.9 kg and 285763.2 kg |
Discharge angle | 60 degrees and 58 degrees |
Images
Sizes
1. Dimensional length | 9700 mm | 1. Dimensional length | 14420 mm |
2. Overall width | 3970 mm | 2. Overall width | 9050 mm |
3. Headroom | 4410 mm | 3. Headroom | 7170 mm |
4. Wheelbase | 4190 mm | 4. Wheelbase | 6150 mm |
5. Clearance | 600 mm | 5. Clearance | 910 mm |
6. Unloading height | 8800 mm | 6. Unloading height | 14280 mm |
7. Unloading ground clearance | 660 mm | 7. Unloading ground clearance | 1860 mm |
Dump
8. Discharge angle | 60 degrees | 8. Discharge angle | 58 degrees |