vs.

      Caterpillar 775D vs. Hitachi EH600

      16 reasons to buy Caterpillar 775D:

      Weight

      Unloaded rear weight distribution 52.7 % and 50 % 5 % more or 2.7 %
      Loaded front weight distribution 33.3 % and 32 % 4 % more or 1.3 %

      Sizes

      Clearance 600 mm and 450 mm 25 % more or 150 mm
      Unloading ground clearance 660 mm and 460 mm 30 % more or 200 mm

      Operation

      Fuel Capacity 700 l. and 550 l. 21 % more or 150 l.
      Cooling system fluid volume 151 l. and 70 l. 54 % more or 81 l.
      Engine oil volume 68 l. and 34 l. 50 % more or 34 l.

      Motor

      Full power 540.6 kW and 298 kW 45 % more or 242.6 kW
      Effective power 516.8 kW and 286 kW 45 % more or 230.8 kW
      Displacement 27 l. and 14 l. 48 % more or 13 l.
      Cylinders number 12 and 6 50 % more or 6

      Gear box

      Forward gears number 7 and 5 29 % more or 2
      Maximum speed 65.8 km/h and 60 km/h 9 % more or 5.8 km/h

      Dump

      Lifting time 9.5 sec and 12 sec 21 % less or 2.5 sec
      Brimmed lifting capacity 31.4 m3 and 14.6 m3 54 % more or 16.8 m3
      Lifting capacity with top 41.5 m3 and 21 m3 49 % more or 20.5 m3

      4 reasons to buy Hitachi EH600:

      Weight

      Loaded rear weight distribution 68 % and 66.7 % 2 % more or 1.3 %
      Unloaded front weight distribution 50 % and 47.3 % 5 % more or 2.7 %

      Motor

      Power measured at 2100 rev / min and 2000 rev / min 5 % more or 100 rev

      Dump

      Lowering time 12 sec and 12.5 sec 4 % less or 0.5 sec

      Neutral reasons:

      Weight

      Weight without load 43227.4 kg and 23790 kg
      Laden weight 106594.2 kg and 56911 kg

      Sizes

      Dimensional length 9700 mm and 8040 mm
      Overall width 3970 mm and 3730 mm
      Headroom 4410 mm and 3600 mm
      Wheelbase 4190 mm and 3650 mm
      Unloading height 8800 mm and 7730 mm

      Operation

      Operating voltage 24 V and 24 V
      Tyre size 24.00-R35 and Michelin 18.00R25 E4

      Motor

      Manufacturer Caterpillar and Cummins
      Model 3412ETA and N14-C400
      Aspiration Turbocharging with subsequent air cooling (by a cooling radiator) and Turbocharging with subsequent air cooling (by a cooling radiator)

      Gear box

      Transmission type powershift and Allison CLBT 754. Automatic transmission of planetary type with integrated retarder and  starting with the second transmission
      Reverse gears number 1 and 1

      Dump

      Discharge angle 60 degrees and 55 degrees
      Nominal payload 63366.9 kg and 29029.9 kg

      Images

      Sizes

      1. Dimensional length 9700 mm 1. Dimensional length 8040 mm
      2. Overall width 3970 mm 2. Overall width 3730 mm
      3. Headroom 4410 mm 3. Headroom 3600 mm
      4. Wheelbase 4190 mm 4. Wheelbase 3650 mm
      5. Clearance 600 mm 5. Clearance 450 mm
      6. Unloading height 8800 mm 6. Unloading height 7730 mm
      7. Unloading ground clearance 660 mm 7. Unloading ground clearance 460 mm

      Dump

      8. Discharge angle 60 degrees 8. Discharge angle 55 degrees