- Home/
- Comparison/
- Mining Dump Truck/
- Caterpillar 775D vs. Terex TR100
Caterpillar 775D vs. Terex TR100
7 reasons to buy Caterpillar 775D:
Weight
Loaded rear weight distribution | 66.7 % and 66 % | 1 % more or 0.7 % |
Unloaded rear weight distribution | 52.7 % and 51 % | 3 % more or 1.7 % |
Operation
Differential/final drive fluid volume | 155 l. and 61 l. | 61 % more or 94 l. |
Gear box
Forward gears number | 7 and 6 | 14 % more or 1 |
Maximum speed | 65.8 km/h and 48.5 km/h | 26 % more or 17.3 km/h |
Dump
Lifting time | 9.5 sec and 16.3 sec | 42 % less or 6.8 sec |
Lowering time | 12.5 sec and 18 sec | 31 % less or 5.5 sec |
18 reasons to buy Terex TR100:
Weight
Loaded front weight distribution | 34 % and 33.3 % | 2 % more or 0.7 % |
Unloaded front weight distribution | 49 % and 47.3 % | 3 % more or 1.7 % |
Sizes
Clearance | 800 mm and 600 mm | 25 % more or 200 mm |
Unloading ground clearance | 700 mm and 660 mm | 6 % more or 40 mm |
Operation
Cooling system fluid volume | 276 l. and 151 l. | 45 % more or 125 l. |
Engine oil volume | 108 l. and 68 l. | 37 % more or 40 l. |
Steering system fluid volume | 72 l. and 60 l. | 17 % more or 12 l. |
Generator current strength | 70 amperes and 50 amperes | 29 % more or 20 amperes |
Fuel Capacity | 1275 l. and 700 l. | 45 % more or 575 l. |
Motor
Power measured at | 2100 rev / min and 2000 rev / min | 5 % more or 100 rev |
Displacement | 31.9 l. and 27 l. | 15 % more or 4.9 l. |
Torque measured at | 1350 rev / min and 1200 rev / min | 11 % more or 150 rev |
Maximum torque | 4630.1 Nm and 2757.7 Nm | 40 % more or 1872.4 Nm |
Cylinders number | 16 and 12 | 25 % more or 4 |
Full power | 783 kW and 540.6 kW | 31 % more or 242.4 kW |
Effective power | 703.2 kW and 516.8 kW | 27 % more or 186.4 kW |
Dump
Brimmed lifting capacity | 41.6 m3 and 31.4 m3 | 25 % more or 10.2 m3 |
Lifting capacity with top | 57 m3 and 41.5 m3 | 27 % more or 15.5 m3 |
Neutral reasons:
Weight
Weight without load | 43227.4 kg and 67000.1 kg |
Laden weight | 106594.2 kg and 157720.9 kg |
Sizes
Overall width | 3970 mm and 5900 mm |
Headroom | 4410 mm and 4900 mm |
Wheelbase | 4190 mm and 4600 mm |
Unloading height | 8800 mm and 9000 mm |
Dimensional length | 9700 mm and 10800 mm |
Operation
Operating voltage | 24 V and 24 V |
Tyre size | 24.00-R35 and 27.00-49 (48 Pr) e-4 |
Motor
Aspiration | Turbocharging with subsequent air cooling (by a cooling radiator) and turbocharging |
Manufacturer | Caterpillar and Detroit diesel |
Model | 3412ETA and MTU 16V-2000TA DDEC |
Gear box
Reverse gears number | 1 and 1 |
Transmission type | powershift and Allison M8610 |
Dump
Nominal payload | 63366.9 kg and 90718.5 kg |
Discharge angle | 60 degrees and 58 degrees |
Images
Sizes
1. Dimensional length | 9700 mm | 1. Dimensional length | 10800 mm |
2. Overall width | 3970 mm | 2. Overall width | 5900 mm |
3. Headroom | 4410 mm | 3. Headroom | 4900 mm |
4. Wheelbase | 4190 mm | 4. Wheelbase | 4600 mm |
5. Clearance | 600 mm | 5. Clearance | 800 mm |
6. Unloading height | 8800 mm | 6. Unloading height | 9000 mm |
7. Unloading ground clearance | 660 mm | 7. Unloading ground clearance | 700 mm |
Dump
8. Discharge angle | 60 degrees | 8. Discharge angle | 58 degrees |


