vs.

      Caterpillar 775D vs. Terex TR35

      19 reasons to buy Caterpillar 775D:

      Weight

      Unloaded rear weight distribution 52.7 % and 52 % 1 % more or 0.7 %
      Loaded front weight distribution 33.3 % and 33 % 1 % more or 0.3 %

      Sizes

      Unloading ground clearance 660 mm and 450 mm 32 % more or 210 mm
      Clearance 600 mm and 500 mm 17 % more or 100 mm

      Operation

      Fuel Capacity 700 l. and 371 l. 47 % more or 329 l.
      Cooling system fluid volume 151 l. and 94 l. 38 % more or 57 l.
      Engine oil volume 68 l. and 34 l. 50 % more or 34 l.
      Differential/final drive fluid volume 155 l. and 57 l. 63 % more or 98 l.
      Steering system fluid volume 60 l. and 47 l. 22 % more or 13 l.

      Motor

      Cylinders number 12 and 6 50 % more or 6
      Displacement 27 l. and 10.8 l. 60 % more or 16.2 l.
      Maximum torque 2757.7 Nm and 1898.1 Nm 31 % more or 859.6 Nm
      Full power 540.6 kW and 298.3 kW 45 % more or 242.3 kW
      Effective power 516.8 kW and 275.2 kW 47 % more or 241.6 kW

      Gear box

      Maximum speed 65.8 km/h and 59 km/h 10 % more or 6.8 km/h
      Forward gears number 7 and 5 29 % more or 2

      Dump

      Brimmed lifting capacity 31.4 m3 and 15.3 m3 51 % more or 16.1 m3
      Lifting capacity with top 41.5 m3 and 19.4 m3 53 % more or 22.1 m3
      Lifting time 9.5 sec and 14 sec 32 % less or 4.5 sec

      6 reasons to buy Terex TR35:

      Weight

      Unloaded front weight distribution 48 % and 47.3 % 1 % more or 0.7 %
      Loaded rear weight distribution 67 % and 66.7 % 0 % more or 0.3 %

      Operation

      Generator current strength 70 amperes and 50 amperes 29 % more or 20 amperes

      Motor

      Torque measured at 1400 rev / min and 1200 rev / min 14 % more or 200 rev
      Power measured at 2100 rev / min and 2000 rev / min 5 % more or 100 rev

      Dump

      Lowering time 9.5 sec and 12.5 sec 24 % less or 3.0 sec

      Neutral reasons:

      Weight

      Weight without load 43227.4 kg and 23722.9 kg
      Laden weight 106594.2 kg and 55474.3 kg

      Sizes

      Headroom 4410 mm and 3900 mm
      Wheelbase 4190 mm and 3600 mm
      Unloading height 8800 mm and 6900 mm
      Dimensional length 9700 mm and 8000 mm
      Overall width 3970 mm and 4000 mm

      Operation

      Operating voltage 24 V and 24 V
      Tyre size 24.00-R35 and 18.00-25 (32PR) E-3

      Motor

      Aspiration Turbocharging with subsequent air cooling (by a cooling radiator) and turbocharging
      Manufacturer Caterpillar and Cummins
      Model 3412ETA and QSM11-C400E

      Gear box

      Reverse gears number 1 and 1
      Transmission type powershift and Allison 4500 RDS

      Dump

      Nominal payload 63366.9 kg and 31751.5 kg
      Discharge angle 60 degrees and 58 degrees

      Images

      Sizes

      3. Headroom 4410 mm 3. Headroom 3900 mm
      4. Wheelbase 4190 mm 4. Wheelbase 3600 mm
      5. Clearance 600 mm 5. Clearance 500 mm
      6. Unloading height 8800 mm 6. Unloading height 6900 mm
      7. Unloading ground clearance 660 mm 7. Unloading ground clearance 450 mm
      1. Dimensional length 9700 mm 1. Dimensional length 8000 mm
      2. Overall width 3970 mm 2. Overall width 4000 mm

      Dump

      8. Discharge angle 60 degrees 8. Discharge angle 58 degrees