vs.

      Caterpillar 775D vs. Terex TR45

      18 reasons to buy Caterpillar 775D:

      Weight

      Unloaded rear weight distribution 52.7 % and 52 % 1 % more or 0.7 %
      Loaded rear weight distribution 66.7 % and 66 % 1 % more or 0.7 %

      Sizes

      Unloading ground clearance 660 mm and 585 mm 11 % more or 75 mm
      Clearance 600 mm and 585 mm 2 % more or 15 mm

      Operation

      Fuel Capacity 700 l. and 606 l. 13 % more or 94 l.
      Cooling system fluid volume 151 l. and 144 l. 5 % more or 7 l.
      Engine oil volume 68 l. and 62 l. 9 % more or 6 l.
      Differential/final drive fluid volume 155 l. and 60 l. 61 % more or 95 l.

      Motor

      Cylinders number 12 and 6 50 % more or 6
      Displacement 27 l. and 18.8 l. 30 % more or 8.2 l.
      Maximum torque 2757.7 Nm and 2406.6 Nm 13 % more or 351.1 Nm
      Full power 540.6 kW and 391.5 kW 28 % more or 149.1 kW
      Effective power 516.8 kW and 369.1 kW 29 % more or 147.7 kW

      Gear box

      Forward gears number 7 and 6 14 % more or 1
      Maximum speed 65.8 km/h and 65 km/h 1 % more or 0.8 km/h

      Dump

      Brimmed lifting capacity 31.4 m3 and 19.6 m3 38 % more or 11.8 m3
      Lifting capacity with top 41.5 m3 and 26 m3 37 % more or 15.5 m3
      Lifting time 9.5 sec and 13 sec 27 % less or 3.5 sec

      8 reasons to buy Terex TR45:

      Weight

      Unloaded front weight distribution 48 % and 47.3 % 1 % more or 0.7 %
      Loaded front weight distribution 34 % and 33.3 % 2 % more or 0.7 %

      Operation

      Steering system fluid volume 85 l. and 60 l. 29 % more or 25 l.
      Generator current strength 70 amperes and 50 amperes 29 % more or 20 amperes

      Motor

      Power measured at 2100 rev / min and 2000 rev / min 5 % more or 100 rev
      Torque measured at 1300 rev / min and 1200 rev / min 8 % more or 100 rev

      Gear box

      Reverse gears number 2 and 1 50 % more or 1

      Dump

      Lowering time 9 sec and 12.5 sec 28 % less or 3.5 sec

      Neutral reasons:

      Weight

      Weight without load 43227.4 kg and 37135.6 kg
      Laden weight 106594.2 kg and 77958.9 kg

      Sizes

      Overall width 3970 mm and 4630 mm
      Headroom 4410 mm and 4245 mm
      Wheelbase 4190 mm and 3940 mm
      Unloading height 8800 mm and 7645 mm
      Dimensional length 9700 mm and 8700 mm

      Operation

      Operating voltage 24 V and 24 V
      Tyre size 24.00-R35 and 21.00-35 layers of diagonal cord

      Motor

      Aspiration Turbocharging with subsequent air cooling (by a cooling radiator) and turbocharging
      Manufacturer Caterpillar and Cummins
      Model 3412ETA and QSK19-C525

      Gear box

      Transmission type powershift and Allison M5610AR

      Dump

      Nominal payload 63366.9 kg and 40823.3 kg
      Discharge angle 60 degrees and 58 degrees

      Images

      Sizes

      1. Dimensional length 9700 mm 1. Dimensional length 8700 mm
      2. Overall width 3970 mm 2. Overall width 4630 mm
      3. Headroom 4410 mm 3. Headroom 4245 mm
      4. Wheelbase 4190 mm 4. Wheelbase 3940 mm
      5. Clearance 600 mm 5. Clearance 585 mm
      6. Unloading height 8800 mm 6. Unloading height 7645 mm
      7. Unloading ground clearance 660 mm 7. Unloading ground clearance 585 mm

      Dump

      8. Discharge angle 60 degrees 8. Discharge angle 58 degrees