Construction Machinery. Grader Caterpillar 12G

Steerage

Left and right hinge connection	50 degrees
Turn radius	7.3 m

Sizes

Height to cab upper part	3330 mm
Dimensional length	8310 mm
Between tyres width	2410 mm
Wheelbase	5920 mm
Blade base	2570 mm
Dual axis wheelbase	1520 mm

Operation

Overall standard operating weight	12700 kg
Front axle maximum operating weight	4530 kg
Rear axle maximum operating weight	9800 kg
Total maximum operating weight	14330 kg
Fuel Capacity	283 l.
Oil system fluid volume	29 l.
Cooling system fluid volume	47 l.
Hydraulic system fluid volume	76 l.
Transmission fluid volume	87 l.
Each tandem case fluid volume	64 l.
Operating voltage	24 V
Generator current strength	19 amperes
Front axle standard operating weight	3570 kg
Rear axle standard operating weight	9130 kg

Motor

Manufacturer	Caterpillar
Power measured at	2200 rev / min
Effective speeds output 5-6	100.7 kW
Cylinders number	6
Maximum power	100.7 kW
Displacement	10.5 l.

Hydraulic system

Type of pump	Constant pressure system with locking in the middle position, with the piston pump of variable displacement volume
Pump flow rate	193 l/min
Overflow valve pressure	14823.7 kPa

Gear box

Transmission type	Powershift transmission with direct drive
Forward gears number	6
Reverse gears number	6
Maximum forward speed	41 km/h
Maximum reverse gear	41 km/h

Front Axle

Wheel tilt	18 degrees
General fluctuations	32 degrees
Clearance	610 mm

Dump

Mouldboard width	3650 mm
Mouldboard height	610 mm
Mouldboard thickness	22 mm
Maximum cutting depth	450 mm
Left lateral displacement	670 mm
Lateral right shift	520 mm

Circle

Rotating	360 degrees
Maximum radius outside left tyres	1830 mm
Right maximum radius outside tyres	1870 mm
Maximum lifting above ground level	438 mm
Blade tilt front angle	90 degrees
Blade tilt rear angle	90 degrees
Diameter	1530 mm

Images

Sizes

1. Dimensional length	8310 mm
2. Between tyres width	2410 mm
3. Height to cab upper part	3330 mm
4. Wheelbase	5920 mm
7. Dual axis wheelbase	1520 mm
8. Blade base	2570 mm