- Home/
- Specifications/
- Grader/
- Caterpillar/
- 140M
Construction Machinery. Grader Caterpillar 140M
Steerage
| Left and right hinge connection | 20 degrees |
| Turn radius | 7.8 m |
Sizes
| Height to cab upper part | 3293 mm |
| Dimensional length | 8713 mm |
| Between tyres width | 2493 mm |
| Wheelbase | 6121 mm |
| Blade base | 2552 mm |
| Dual axis wheelbase | 1523 mm |
| Rear ground clearance | 341 mm |
| Front part clearance | 571 mm |
Operation
| Front axle standard operating weight | 4161 kg |
| Rear axle standard operating weight | 10969 kg |
| Overall standard operating weight | 15130 kg |
| Front axle maximum operating weight | 8123 kg |
| Rear axle maximum operating weight | 14954 kg |
| Total maximum operating weight | 23077 kg |
| Fuel Capacity | 416 l. |
| Cooling system fluid volume | 47 l. |
| Hydraulic system fluid volume | 60 l. |
| Rear differential/final drive fluid volume | 65 l. |
| Circular gearbox fluid volume | 7 l. |
| Each tandem case fluid volume | 64 l. |
Motor
| Manufacturer | Caterpillar |
| Model | C7 ACERT VHP |
| Power measured at | 2000 rev / min |
| Cylinders number | 6 |
| Effective speeds output 7-8 | 136.5 kW |
| Maximum power | 136.5 kW |
| Displacement | 7.2 l. |
Hydraulic system
| Type of pump | variable displacement piston pump |
| Pump flow rate | 210 l/min |
| Overflow valve pressure | 24150 kPa |
Gear box
| Maximum forward speed | 46.6 km/h |
| Maximum reverse gear | 36.8 km/h |
| Transmission type | direct drive, powershift, camshaft |
| Forward gears number | 8 |
| Reverse gears number | 6 |
Front Axle
| Wheel tilt | 18 degrees |
| General fluctuations | 32 degrees |
| Clearance | 571 mm |
Dump
| Mouldboard width | 3700 mm |
| Mouldboard height | 610 mm |
| Mouldboard thickness | 22 mm |
| Maximum cutting depth | 715 mm |
| Left lateral displacement | 510 mm |
| Lateral right shift | 660 mm |
| Blade pulling at maximum weight | 20769 kg |
Circle
| Diameter | 1530 mm |
| Maximum radius outside left tyres | 1790 mm |
| Left shift | 695 mm |
| Right maximum radius outside tyres | 1978 mm |
| Right shift | 728 mm |
| Maximum lifting above ground level | 480 mm |
| Blade tilt front angle | 40 degrees |
| Blade tilt rear angle | 5 degrees |
Images
Sizes
| 1. Dimensional length | 8713 mm |
| 2. Between tyres width | 2493 mm |
| 3. Height to cab upper part | 3293 mm |
| 4. Wheelbase | 6121 mm |
| 5. Rear ground clearance | 341 mm |
| 6. Front part clearance | 571 mm |
| 7. Dual axis wheelbase | 1523 mm |
| 8. Blade base | 2552 mm |