- Home/
- Specifications/
- Grader/
- Caterpillar/
- 160M2 AWD
Construction Machinery. Grader Caterpillar 160M2 AWD
Steerage
| Left and right hinge connection | 20 degrees |
| Turn radius | 7.8 m |
Sizes
| Height to cab upper part | 3287 mm |
| Dimensional length | 8898 mm |
| Between tyres width | 2581 mm |
| Wheelbase | 6126 mm |
| Blade base | 2557 mm |
| Dual axis wheelbase | 1523 mm |
| Rear ground clearance | 344 mm |
| Front part clearance | 600 mm |
Operation
| Front axle standard operating weight | 5805.1 kg |
| Rear axle standard operating weight | 14707.3 kg |
| Overall standard operating weight | 20511.9 kg |
| Front axle maximum operating weight | 6052.3 kg |
| Rear axle maximum operating weight | 16530.7 kg |
| Total maximum operating weight | 23947.4 kg |
| Fuel Capacity | 416.4 l. |
| Oil system fluid volume | 29.9 l. |
| Cooling system fluid volume | 56 l. |
| Hydraulic system fluid volume | 99.9 l. |
| Transmission fluid volume | 65.1 l. |
| Circular gearbox fluid volume | 6.8 l. |
| Each tandem case fluid volume | 64 l. |
| Operating voltage | 24 V |
| Generator current strength | 150 amperes |
Motor
| Manufacturer | Caterpillar |
| Model | C9.3 ACERT VHP |
| Power measured at | 2100 rev / min |
| Torque measured at | 2100 rev / min |
| Effective speeds output 7-8 | 211 kW |
| Cylinders number | 6 |
| Effective drives torque 7-8 | 1355.8 Nm |
Hydraulic system
| Type of pump | variable displacement piston pump |
| Pump flow rate | 210.1 l/min |
| Overflow valve pressure | 24152.3 kPa |
Gear box
| Reverse gears number | 6 |
| Maximum forward speed | 46.7 km/h |
| Maximum reverse gear | 36.9 km/h |
| Transmission type | Powershift transmission with direct drive |
| Forward gears number | 8 |
Front Axle
| Wheel tilt | 18 degrees |
| General fluctuations | 32 degrees |
| Clearance | 600 mm |
Dump
| Lowered blade pressure | 10380 kg |
| Mouldboard width | 4267.2 mm |
| Mouldboard height | 609.6 mm |
| Mouldboard thickness | 22 mm |
| Maximum cutting depth | 750 mm |
| Left lateral displacement | 510 mm |
| Lateral right shift | 660 mm |
| Blade pulling at maximum weight | 9091.8 kg |
Circle
| Diameter | 1530 mm |
| Rotating | 360 degrees |
| Left shift | 695 mm |
| Right shift | 728 mm |
| Maximum radius outside left tyres | 2090 mm |
| Right maximum radius outside tyres | 2278 mm |
| Maximum lifting above ground level | 452 mm |
| Blade tilt front angle | 40 degrees |
| Blade tilt rear angle | 5 degrees |
Images
Sizes
| 1. Dimensional length | 8898 mm |
| 2. Between tyres width | 2581 mm |
| 3. Height to cab upper part | 3287 mm |
| 4. Wheelbase | 6126 mm |
| 5. Rear ground clearance | 344 mm |
| 6. Front part clearance | 600 mm |
| 7. Dual axis wheelbase | 1523 mm |
| 8. Blade base | 2557 mm |
