- Home/
- Specifications/
- Grader/
- Caterpillar/
- 16H
Construction Machinery. Grader Caterpillar 16H
Steerage
Left and right hinge connection | 20 degrees |
Turn radius | 8.2 m |
Sizes
Height to cab upper part | 3524 mm |
Dimensional length | 9994 mm |
Between tyres width | 3077 mm |
Wheelbase | 6960 mm |
Blade base | 3071 mm |
Dual axis wheelbase | 1841 mm |
Rear ground clearance | 409 mm |
Front part clearance | 732 mm |
Operation
Rear axle standard operating weight | 17758 kg |
Overall standard operating weight | 24740 kg |
Front axle maximum operating weight | 8846 kg |
Rear axle maximum operating weight | 22746 kg |
Total maximum operating weight | 31592 kg |
Fuel Capacity | 492 l. |
Cooling system fluid volume | 46.5 l. |
Hydraulic system fluid volume | 129 l. |
Rear differential/final drive fluid volume | 114 l. |
Circular gearbox fluid volume | 8 l. |
Each tandem case fluid volume | 121 l. |
Operating voltage | 24 V |
Generator current strength | 75 amperes |
Front axle standard operating weight | 6982 kg |
Motor
Manufacturer | Caterpillar |
Model | 3196 ETA |
Effective speeds output 1-2 | 198 kW |
Effective speeds output 3-4 | 212.5 kW |
Power measured at | 2000 rev / min |
Effective speeds output 5-6 | 212.5 kW |
Cylinders number | 6 |
Effective speeds output 7-8 | 212.5 kW |
Maximum power | 212.5 kW |
Effective drives torque 7-8 | 1550 Nm |
Displacement | 11.9 l. |
Hydraulic system
Type of pump | axial piston |
Pump flow rate | 254 l/min |
Overflow valve pressure | 24150 kPa |
Gear box
Transmission type | direct drive, powershift, of planetary type |
Forward gears number | 8 |
Reverse gears number | 8 |
Maximum forward speed | 48.1 km/h |
Maximum reverse gear | 45.7 km/h |
Front Axle
Wheel tilt | 18 degrees |
General fluctuations | 32 degrees |
Clearance | 732 mm |
Dump
Left lateral displacement | 650 mm |
Lateral right shift | 790 mm |
Blade pulling at maximum weight | 20471 kg |
Lowered blade pressure | 15831 kg |
Mouldboard width | 4877 mm |
Mouldboard height | 787 mm |
Mouldboard thickness | 25 mm |
Maximum cutting depth | 470 mm |
Circle
Diameter | 1822 mm |
Left shift | 690 mm |
Right shift | 560 mm |
Maximum radius outside left tyres | 2311 mm |
Right maximum radius outside tyres | 2311 mm |
Maximum lifting above ground level | 419 mm |
Blade tilt front angle | 40 degrees |
Blade tilt rear angle | 5 degrees |



Images
Sizes
1. Dimensional length | 9994 mm |
2. Between tyres width | 3077 mm |
3. Height to cab upper part | 3524 mm |
4. Wheelbase | 6960 mm |
5. Rear ground clearance | 409 mm |
6. Front part clearance | 732 mm |
7. Dual axis wheelbase | 1841 mm |
8. Blade base | 3071 mm |