- Home/
- Specifications/
- Grader/
- Caterpillar/
- 16M
Construction Machinery. Grader Caterpillar 16M
Steerage
| Left and right hinge connection | 20 degrees |
| Turn radius | 8.9 m |
Sizes
| Front part clearance | 688 mm |
| Height to cab upper part | 3703 mm |
| Dimensional length | 9963 mm |
| Between tyres width | 3095 mm |
| Wheelbase | 6985 mm |
| Blade base | 3069 mm |
| Dual axis wheelbase | 1841 mm |
| Rear ground clearance | 407 mm |
Operation
| Front axle standard operating weight | 7112 kg |
| Rear axle standard operating weight | 18948 kg |
| Overall standard operating weight | 26060 kg |
| Front axle maximum operating weight | 10919 kg |
| Rear axle maximum operating weight | 24753 kg |
| Total maximum operating weight | 35672 kg |
| Fuel Capacity | 511 l. |
| Cooling system fluid volume | 46.5 l. |
| Hydraulic system fluid volume | 114 l. |
| Rear differential/final drive fluid volume | 114 l. |
| Circular gearbox fluid volume | 8 l. |
| Each tandem case fluid volume | 121.5 l. |
| Tyre size | 18.00-25 12PR (G-2) |
Motor
| Manufacturer | Caterpillar |
| Model | C13 ACERT VHP |
| Effective speeds output 1-2 | 225 kW |
| Effective speeds output 3-4 | 232.7 kW |
| Power measured at | 2000 rev / min |
| Effective speeds output 5-6 | 232.7 kW |
| Cylinders number | 6 |
| Effective speeds output 7-8 | 232.7 kW |
| Maximum power | 232.7 kW |
| Effective drives torque 7-8 | 1710 Nm |
| Displacement | 12.5 l. |
Hydraulic system
| Type of pump | variable displacement piston pump |
| Pump flow rate | 280 l/min |
| Overflow valve pressure | 24150 kPa |
Gear box
| Transmission type | direct drive, powershift, camshaft |
| Forward gears number | 8 |
| Reverse gears number | 6 |
| Maximum forward speed | 53.9 km/h |
| Maximum reverse gear | 42.6 km/h |
Front Axle
| General fluctuations | 32 degrees |
| Clearance | 688 mm |
| Wheel tilt | 18.2 degrees |
Dump
| Mouldboard width | 4877 mm |
| Mouldboard height | 787 mm |
| Mouldboard thickness | 25 mm |
| Maximum cutting depth | 488 mm |
| Left lateral displacement | 740 mm |
| Lateral right shift | 1094 mm |
| Blade pulling at maximum weight | 22297 kg |
| Lowered blade pressure | 19485 kg |
Circle
| Diameter | 1822 mm |
| Left shift | 647 mm |
| Right shift | 597 mm |
| Maximum radius outside left tyres | 2282 mm |
| Right maximum radius outside tyres | 2587 mm |
| Maximum lifting above ground level | 395 mm |
| Blade tilt front angle | 40 degrees |
| Blade tilt rear angle | 5 degrees |
Images
Sizes
| 1. Dimensional length | 9963 mm |
| 2. Between tyres width | 3095 mm |
| 3. Height to cab upper part | 3703 mm |
| 4. Wheelbase | 6985 mm |
| 5. Rear ground clearance | 407 mm |
| 6. Front part clearance | 688 mm |
| 7. Dual axis wheelbase | 1841 mm |
| 8. Blade base | 3069 mm |