- Home/
- Comparison/
- Grader/
- Caterpillar 12G vs. Case 845B DHP
Caterpillar 12G vs. Case 845B DHP
6 reasons to buy Caterpillar 12G:
Operation
Each tandem case fluid volume | 64 l. and 60.2 l. | 6 % more or 3.8 l. |
Transmission fluid volume | 87 l. and 79.5 l. | 9 % more or 7.5 l. |
Cooling system fluid volume | 47 l. and 39.7 l. | 16 % more or 7.3 l. |
Motor
Displacement | 10.5 l. and 6.7 l. | 36 % more or 3.8 l. |
Gear box
Reverse gears number | 6 and 4 | 33 % more or 2 |
Maximum reverse gear | 41 km/h and 28.5 km/h | 30 % more or 12.5 km/h |
11 reasons to buy Case 845B DHP:
Operation
Generator current strength | 90 amperes and 19 amperes | 79 % more or 71 amperes |
Front axle standard operating weight | 4496 kg and 3570 kg | 21 % more or 926 kg |
Rear axle standard operating weight | 10109.2 kg and 9130 kg | 10 % more or 979.2 kg |
Fuel Capacity | 340.7 l. and 283 l. | 17 % more or 57.7 l. |
Oil system fluid volume | 70 l. and 29 l. | 59 % more or 41 l. |
Hydraulic system fluid volume | 179.8 l. and 76 l. | 58 % more or 103.8 l. |
Hydraulic system
Pump flow rate | 185.5 l/min and 193 l/min | 4 % less or 7.5 l/min |
Gear box
Forward gears number | 8 and 6 | 25 % more or 2 |
Maximum forward speed | 42.8 km/h and 41 km/h | 4 % more or 1.8 km/h |
Dump
Maximum cutting depth | 711.2 mm and 450 mm | 37 % more or 261.2 mm |
Circle
Maximum lifting above ground level | 444.5 mm and 438 mm | 1 % more or 6.5 mm |
Neutral reasons:
Steerage
Left and right hinge connection | 50 degrees and 25 degrees |
Turn radius | 7.3 m and 7.3 m |
Sizes
Blade base | 2570 mm and 2562 mm |
Dual axis wheelbase | 1520 mm and 1572 mm |
Height to cab upper part | 3330 mm and 3340 mm |
Dimensional length | 8310 mm and 8534.4 mm |
Between tyres width | 2410 mm and 2499 mm |
Wheelbase | 5920 mm and 6219 mm |
Operation
Operating voltage | 24 V and 24 V |
Overall standard operating weight | 12700 kg and 14605.2 kg |
Motor
Manufacturer | Caterpillar and Case |
Cylinders number | 6 and 6 |
Power measured at | 2200 rev / min and 2200 rev / min |
Hydraulic system
Type of pump | Constant pressure system with locking in the middle position, with the piston pump of variable displacement volume and piston type with load sensing |
Gear box
Transmission type | Powershift transmission with direct drive and Powershift transmission with direct drive |
Front Axle
Wheel tilt | 18 degrees and 20 degrees |
General fluctuations | 32 degrees and 15.3 degrees |
Dump
Mouldboard height | 610 mm and 558.8 mm |
Mouldboard thickness | 22 mm and 22 mm |
Left lateral displacement | 670 mm and 533.4 mm |
Lateral right shift | 520 mm and 685.8 mm |
Mouldboard width | 3650 mm and 3657.6 mm |
Circle
Diameter | 1530 mm and 1752.6 mm |
Rotating | 360 degrees and 360 degrees |
Images
Sizes
7. Dual axis wheelbase | 1520 mm | 7. Dual axis wheelbase | 1572 mm |
8. Blade base | 2570 mm | 8. Blade base | 2562 mm |
1. Dimensional length | 8310 mm | 1. Dimensional length | 8534.4 mm |
2. Between tyres width | 2410 mm | 2. Between tyres width | 2499 mm |
3. Height to cab upper part | 3330 mm | 3. Height to cab upper part | 3340 mm |
4. Wheelbase | 5920 mm | 4. Wheelbase | 6219 mm |