vs.

      Caterpillar 12G vs. Caterpillar 135H

      11 reasons to buy Caterpillar 12G:

      Operation

      Cooling system fluid volume 47 l. and 39.4 l. 16 % more or 7.6 l.
      Hydraulic system fluid volume 76 l. and 67 l. 12 % more or 9 l.
      Each tandem case fluid volume 64 l. and 48.1 l. 25 % more or 15.9 l.

      Motor

      Power measured at 2200 rev / min and 2000 rev / min 9 % more or 200 rev
      Displacement 10.5 l. and 7.2 l. 31 % more or 3.3 l.

      Gear box

      Maximum reverse gear 41 km/h and 33.2 km/h 19 % more or 7.8 km/h

      Front Axle

      Clearance 610 mm and 608 mm 0 % more or 2 mm

      Circle

      Right maximum radius outside tyres 1870 mm and 1912 mm 2 % less or 42 mm
      Maximum radius outside left tyres 1830 mm and 1840 mm 1 % less or 10 mm
      Blade tilt front angle 90 degrees and 40 degrees 56 % more or 50 degrees
      Blade tilt rear angle 90 degrees and 5 degrees 94 % more or 85 degrees

      11 reasons to buy Caterpillar 135H:

      Operation

      Front axle standard operating weight 3738.5 kg and 3570 kg 5 % more or 168.5 kg
      Fuel Capacity 340.7 l. and 283 l. 17 % more or 57.7 l.
      Rear axle standard operating weight 9343.1 kg and 9130 kg 2 % more or 213.1 kg
      Generator current strength 35 amperes and 19 amperes 46 % more or 16 amperes

      Motor

      Effective speeds output 5-6 115.6 kW and 100.7 kW 13 % more or 14.9 kW
      Maximum power 115.6 kW and 100.7 kW 13 % more or 14.9 kW

      Hydraulic system

      Pump flow rate 144 l/min and 193 l/min 25 % less or 49 l/min

      Gear box

      Forward gears number 8 and 6 25 % more or 2
      Maximum forward speed 42 km/h and 41 km/h 2 % more or 1 km/h

      Dump

      Maximum cutting depth 775 mm and 450 mm 42 % more or 325 mm

      Circle

      Maximum lifting above ground level 457 mm and 438 mm 4 % more or 19 mm

      Neutral reasons:

      Steerage

      Turn radius 7.3 m and 7.3 m
      Left and right hinge connection 50 degrees and 20 degrees

      Sizes

      Between tyres width 2410 mm and 2402 mm
      Dimensional length 8310 mm and 10064 mm
      Wheelbase 5920 mm and 5923 mm
      Blade base 2570 mm and 2596 mm
      Dual axis wheelbase 1520 mm and 1510 mm
      Height to cab upper part 3330 mm and 3332 mm

      Operation

      Overall standard operating weight 12700 kg and 13081.6 kg
      Operating voltage 24 V and 24 V

      Motor

      Manufacturer Caterpillar and Caterpillar
      Cylinders number 6 and 6

      Hydraulic system

      Type of pump Constant pressure system with locking in the middle position, with the piston pump of variable displacement volume and variable displacement piston pump
      Overflow valve pressure 14823.7 kPa and 24131.6 kPa

      Gear box

      Transmission type Powershift transmission with direct drive and direct drive, powershift
      Reverse gears number 6 and 6

      Front Axle

      General fluctuations 32 degrees and 32 degrees
      Wheel tilt 18 degrees and 18 degrees

      Dump

      Mouldboard width 3650 mm and 3658 mm
      Mouldboard height 610 mm and 610 mm
      Mouldboard thickness 22 mm and 22 mm
      Left lateral displacement 670 mm and 524 mm
      Lateral right shift 520 mm and 660 mm

      Images

      Sizes

      1. Dimensional length 8310 mm 1. Dimensional length 10064 mm
      2. Between tyres width 2410 mm 2. Between tyres width 2402 mm
      3. Height to cab upper part 3330 mm 3. Height to cab upper part 3332 mm
      4. Wheelbase 5920 mm 4. Wheelbase 5923 mm
      7. Dual axis wheelbase 1520 mm 7. Dual axis wheelbase 1510 mm
      8. Blade base 2570 mm 8. Blade base 2596 mm