vs.

      Caterpillar 12G vs. Mitsubishi MG230-E

      12 reasons to buy Caterpillar 12G:

      Operation

      Oil system fluid volume 29 l. and 16 l. 45 % more or 13 l.
      Fuel Capacity 283 l. and 210 l. 26 % more or 73 l.
      Transmission fluid volume 87 l. and 23 l. 74 % more or 64 l.
      Each tandem case fluid volume 64 l. and 28 l. 56 % more or 36 l.

      Motor

      Maximum power 100.7 kW and 85.8 kW 15 % more or 14.9 kW
      Displacement 10.5 l. and 5.9 l. 44 % more or 4.6 l.

      Gear box

      Maximum forward speed 41 km/h and 32.6 km/h 20 % more or 8.4 km/h
      Maximum reverse gear 41 km/h and 33.2 km/h 19 % more or 7.8 km/h

      Front Axle

      Clearance 610 mm and 480 mm 21 % more or 130 mm

      Circle

      Blade tilt front angle 90 degrees and 40 degrees 56 % more or 50 degrees
      Blade tilt rear angle 90 degrees and 5 degrees 94 % more or 85 degrees
      Maximum lifting above ground level 438 mm and 430 mm 2 % more or 8 mm

      4 reasons to buy Mitsubishi MG230-E:

      Operation

      Hydraulic system fluid volume 110 l. and 76 l. 31 % more or 34 l.
      Generator current strength 40 amperes and 19 amperes 52 % more or 21 amperes

      Motor

      Power measured at 2500 rev / min and 2200 rev / min 12 % more or 300 rev

      Hydraulic system

      Pump flow rate 110 l/min and 193 l/min 43 % less or 83 l/min

      Neutral reasons:

      Steerage

      Left and right hinge connection 50 degrees and 26 degrees

      Sizes

      Dimensional length 8310 mm and 7325 mm
      Between tyres width 2410 mm and 2140 mm
      Wheelbase 5920 mm and 5300 mm
      Height to cab upper part 3330 mm and 3030 mm
      Blade base 2570 mm and 2185 mm

      Operation

      Operating voltage 24 V and 24 V
      Overall standard operating weight 12700 kg and 11060 kg

      Motor

      Manufacturer Caterpillar and Mitsubishi
      Cylinders number 6 and 6

      Hydraulic system

      Type of pump Constant pressure system with locking in the middle position, with the piston pump of variable displacement volume and Pump with double gear
      Overflow valve pressure 14823.7 kPa and 17.2 kPa

      Gear box

      Transmission type Powershift transmission with direct drive and planetary gear
      Forward gears number 6 and 6
      Reverse gears number 6 and 6

      Front Axle

      Wheel tilt 18 degrees and 20 degrees
      General fluctuations 32 degrees and 30 degrees

      Dump

      Mouldboard width 3650 mm and 3100 mm
      Mouldboard height 610 mm and 610 mm
      Mouldboard thickness 22 mm and 19 mm

      Circle

      Rotating 360 degrees and 360 degrees

      Images

      Sizes

      1. Dimensional length 8310 mm 1. Dimensional length 7325 mm
      2. Between tyres width 2410 mm 2. Between tyres width 2140 mm
      3. Height to cab upper part 3330 mm 3. Height to cab upper part 3030 mm
      4. Wheelbase 5920 mm 4. Wheelbase 5300 mm
      8. Blade base 2570 mm 8. Blade base 2185 mm