vs.

      Caterpillar 12G vs. New Holland RG170.B

      10 reasons to buy Caterpillar 12G:

      Steerage

      Turn radius 7.3 m and 7289 m 100 % less or 7281.7 m

      Operation

      Cooling system fluid volume 47 l. and 40 l. 15 % more or 7 l.
      Transmission fluid volume 87 l. and 28.5 l. 67 % more or 58.5 l.
      Each tandem case fluid volume 64 l. and 22.7 l. 65 % more or 41.3 l.

      Motor

      Displacement 10.5 l. and 5.9 l. 44 % more or 4.6 l.

      Gear box

      Reverse gears number 6 and 4 33 % more or 2
      Maximum reverse gear 41 km/h and 30 km/h 27 % more or 11 km/h

      Circle

      Maximum radius outside left tyres 1830 mm and 1978 mm 7 % less or 148 mm
      Right maximum radius outside tyres 1870 mm and 2174 mm 14 % less or 304 mm
      Blade tilt front angle 90 degrees and 42 degrees 53 % more or 48 degrees

      13 reasons to buy New Holland RG170.B:

      Operation

      Fuel Capacity 341 l. and 283 l. 17 % more or 58 l.
      Front axle standard operating weight 4250 kg and 3570 kg 16 % more or 680 kg
      Rear axle standard operating weight 10300 kg and 9130 kg 11 % more or 1170 kg
      Hydraulic system fluid volume 180 l. and 76 l. 58 % more or 104 l.
      Generator current strength 70 amperes and 19 amperes 73 % more or 51 amperes

      Motor

      Effective speeds output 5-6 149.1 kW and 100.7 kW 32 % more or 48.4 kW
      Maximum power 149.1 kW and 100.7 kW 32 % more or 48.4 kW

      Hydraulic system

      Pump flow rate 185.5 l/min and 193 l/min 4 % less or 7.5 l/min

      Gear box

      Maximum forward speed 42.9 km/h and 41 km/h 4 % more or 1.9 km/h
      Forward gears number 8 and 6 25 % more or 2

      Front Axle

      Clearance 622 mm and 610 mm 2 % more or 12 mm

      Dump

      Maximum cutting depth 711 mm and 450 mm 37 % more or 261 mm

      Circle

      Maximum lifting above ground level 445 mm and 438 mm 2 % more or 7 mm

      Neutral reasons:

      Steerage

      Left and right hinge connection 50 degrees and 25 degrees

      Sizes

      Dimensional length 8310 mm and 9309 mm
      Between tyres width 2410 mm and 2512 mm
      Wheelbase 5920 mm and 6219 mm
      Blade base 2570 mm and 2562 mm
      Dual axis wheelbase 1520 mm and 1594 mm
      Height to cab upper part 3330 mm and 3140 mm

      Operation

      Overall standard operating weight 12700 kg and 14550 kg
      Operating voltage 24 V and 24 V

      Motor

      Manufacturer Caterpillar and Cummins

      Hydraulic system

      Overflow valve pressure 14823.7 kPa and 19305.3 kPa
      Type of pump Constant pressure system with locking in the middle position, with the piston pump of variable displacement volume and variable displacement piston pump with load sensing

      Gear box

      Transmission type Powershift transmission with direct drive and powershift transmission with direct drive

      Front Axle

      General fluctuations 32 degrees and 20 degrees
      Wheel tilt 18 degrees and 48 degrees

      Dump

      Mouldboard width 3650 mm and 3658 mm
      Mouldboard height 610 mm and 622 mm
      Mouldboard thickness 22 mm and 22 mm
      Left lateral displacement 670 mm and 533 mm
      Lateral right shift 520 mm and 686 mm

      Circle

      Diameter 1530 mm and 1753 mm
      Rotating 360 degrees and 360 degrees
      Blade tilt rear angle 90 degrees and 90 degrees

      Images

      Sizes

      1. Dimensional length 8310 mm 1. Dimensional length 9309 mm
      2. Between tyres width 2410 mm 2. Between tyres width 2512 mm
      3. Height to cab upper part 3330 mm 3. Height to cab upper part 3140 mm
      4. Wheelbase 5920 mm 4. Wheelbase 6219 mm
      7. Dual axis wheelbase 1520 mm 7. Dual axis wheelbase 1594 mm
      8. Blade base 2570 mm 8. Blade base 2562 mm