vs.

      Caterpillar 140M vs. Caterpillar 12M

      13 reasons to buy Caterpillar 140M:

      Operation

      Front axle standard operating weight 4161 kg and 4008 kg 4 % more or 153 kg
      Rear axle standard operating weight 10969 kg and 10514 kg 4 % more or 455 kg
      Front axle maximum operating weight 8123 kg and 6933 kg 15 % more or 1190 kg
      Rear axle maximum operating weight 14954 kg and 13338 kg 11 % more or 1616 kg
      Fuel Capacity 416 l. and 340 l. 18 % more or 76 l.
      Cooling system fluid volume 47 l. and 40 l. 15 % more or 7 l.
      Rear differential/final drive fluid volume 65 l. and 50 l. 23 % more or 15 l.
      Each tandem case fluid volume 64 l. and 61 l. 5 % more or 3 l.

      Motor

      Effective speeds output 7-8 136.5 kW and 129 kW 5 % more or 7.5 kW
      Maximum power 136.5 kW and 129 kW 5 % more or 7.5 kW

      Gear box

      Maximum forward speed 46.6 km/h and 44.5 km/h 5 % more or 2.1 km/h

      Dump

      Blade pulling at maximum weight 20769 kg and 12004 kg 42 % more or 8765 kg

      Circle

      Maximum lifting above ground level 480 mm and 427 mm 11 % more or 53 mm

      10 reasons to buy Caterpillar 12M:

      Steerage

      Turn radius 7.5 m and 7.8 m 4 % less or 0.3 m

      Sizes

      Rear ground clearance 347 mm and 341 mm 2 % more or 6 mm
      Front part clearance 572 mm and 571 mm 0 % more or 1 mm

      Motor

      Displacement 403 l. and 7.2 l. 98 % more or 395.8 l.

      Hydraulic system

      Pump flow rate 193 l/min and 210 l/min 8 % less or 17 l/min

      Gear box

      Maximum reverse gear 37.8 km/h and 36.8 km/h 3 % more or 1.0 km/h

      Front Axle

      Clearance 572 mm and 571 mm 0 % more or 1 mm

      Dump

      Maximum cutting depth 720 mm and 715 mm 1 % more or 5 mm

      Circle

      Right maximum radius outside tyres 1905 mm and 1978 mm 4 % less or 73 mm
      Maximum radius outside left tyres 1742 mm and 1790 mm 3 % less or 48 mm

      Neutral reasons:

      Steerage

      Left and right hinge connection 20 degrees and 20 degrees

      Sizes

      Height to cab upper part 3293 mm and 3278 mm
      Dimensional length 8713 mm and 8488 mm
      Between tyres width 2493 mm and 2481 mm
      Wheelbase 6121 mm and 5915 mm
      Blade base 2552 mm and 2511 mm
      Dual axis wheelbase 1523 mm and 1511 mm

      Operation

      Overall standard operating weight 15130 kg and 14522 kg
      Total maximum operating weight 23077 kg and 20271 kg
      Hydraulic system fluid volume 60 l. and 60 l.
      Circular gearbox fluid volume 7 l. and 7 l.

      Motor

      Manufacturer Caterpillar and Caterpillar
      Model C7 ACERT VHP and C6.6 ACERT VHP
      Power measured at 2000 rev / min and 2000 rev / min
      Cylinders number 6 and 6

      Hydraulic system

      Type of pump variable displacement piston pump and variable displacement piston pump
      Overflow valve pressure 24150 kPa and 24100 kPa

      Gear box

      Forward gears number 8 and 8
      Reverse gears number 6 and 6
      Transmission type direct drive, powershift, camshaft and direct drive, powershift, camshaft

      Front Axle

      Wheel tilt 18 degrees and 18 degrees
      General fluctuations 32 degrees and 32 degrees

      Dump

      Mouldboard width 3700 mm and 3668 mm
      Mouldboard height 610 mm and 609.6 mm
      Mouldboard thickness 22 mm and 22 mm
      Left lateral displacement 510 mm and 510 mm
      Lateral right shift 660 mm and 660 mm

      Circle

      Right shift 728 mm and 656 mm
      Blade tilt front angle 40 degrees and 40 degrees
      Blade tilt rear angle 5 degrees and 5 degrees
      Diameter 1530 mm and 1530 mm
      Left shift 695 mm and 656 mm

      Images

      Sizes

      1. Dimensional length 8713 mm 1. Dimensional length 8488 mm
      2. Between tyres width 2493 mm 2. Between tyres width 2481 mm
      3. Height to cab upper part 3293 mm 3. Height to cab upper part 3278 mm
      4. Wheelbase 6121 mm 4. Wheelbase 5915 mm
      5. Rear ground clearance 341 mm 5. Rear ground clearance 347 mm
      6. Front part clearance 571 mm 6. Front part clearance 572 mm
      7. Dual axis wheelbase 1523 mm 7. Dual axis wheelbase 1511 mm
      8. Blade base 2552 mm 8. Blade base 2511 mm