vs.

      Caterpillar 140M vs. Caterpillar 24M

      8 reasons to buy Caterpillar 140M:

      Steerage

      Turn radius 7.8 m and 12.4 m 37 % less or 4.6 m

      Hydraulic system

      Pump flow rate 210 l/min and 550 l/min 62 % less or 340 l/min

      Gear box

      Forward gears number 8 and 6 25 % more or 2
      Reverse gears number 6 and 3 50 % more or 3
      Maximum forward speed 46.6 km/h and 43 km/h 8 % more or 3.6 km/h

      Dump

      Maximum cutting depth 715 mm and 657 mm 8 % more or 58 mm

      Circle

      Maximum radius outside left tyres 1790 mm and 3222 mm 44 % less or 1432 mm
      Right maximum radius outside tyres 1978 mm and 3228 mm 39 % less or 1250 mm

      18 reasons to buy Caterpillar 24M:

      Sizes

      Rear ground clearance 507 mm and 341 mm 33 % more or 166 mm
      Front part clearance 858 mm and 571 mm 33 % more or 287 mm

      Operation

      Rear differential/final drive fluid volume 184 l. and 65 l. 65 % more or 119 l.
      Front axle maximum operating weight 19927 kg and 8123 kg 59 % more or 11804 kg
      Circular gearbox fluid volume 8.5 l. and 7 l. 18 % more or 1.5 l.
      Rear axle maximum operating weight 46211 kg and 14954 kg 68 % more or 31257 kg
      Each tandem case fluid volume 322 l. and 64 l. 80 % more or 258 l.
      Fuel Capacity 1326 l. and 416 l. 69 % more or 910 l.
      Cooling system fluid volume 90 l. and 47 l. 48 % more or 43 l.
      Hydraulic system fluid volume 264 l. and 60 l. 77 % more or 204 l.
      Front axle standard operating weight 18761 kg and 4161 kg 78 % more or 14600 kg
      Rear axle standard operating weight 43695 kg and 10969 kg 75 % more or 32726 kg

      Motor

      Effective speeds output 7-8 397.5 kW and 136.5 kW 66 % more or 261.0 kW
      Maximum power 397.5 kW and 136.5 kW 66 % more or 261.0 kW
      Displacement 18.1 l. and 7.2 l. 60 % more or 10.9 l.

      Gear box

      Maximum reverse gear 41.2 km/h and 36.8 km/h 11 % more or 4.4 km/h

      Front Axle

      Clearance 858 mm and 571 mm 33 % more or 287 mm

      Circle

      Maximum lifting above ground level 634 mm and 480 mm 24 % more or 154 mm

      Neutral reasons:

      Steerage

      Left and right hinge connection 20 degrees and 25 degrees

      Sizes

      Wheelbase 6121 mm and 10278 mm
      Blade base 2552 mm and 4048 mm
      Dual axis wheelbase 1523 mm and 2285 mm
      Height to cab upper part 3293 mm and 4352 mm
      Dimensional length 8713 mm and 14194 mm
      Between tyres width 2493 mm and 4280 mm

      Operation

      Total maximum operating weight 23077 kg and 66138 kg
      Overall standard operating weight 15130 kg and 62456 kg

      Motor

      Manufacturer Caterpillar and Caterpillar
      Model C7 ACERT VHP and C18 ACERT
      Power measured at 2000 rev / min and 2000 rev / min
      Cylinders number 6 and 6

      Hydraulic system

      Type of pump variable displacement piston pump and variable displacement piston pump
      Overflow valve pressure 24150 kPa and 24150 kPa

      Gear box

      Transmission type direct drive, powershift, camshaft and automatic, electronically controlled gear shifting under load

      Front Axle

      Wheel tilt 18 degrees and 18 degrees
      General fluctuations 32 degrees and 32 degrees

      Dump

      Mouldboard width 3700 mm and 7315 mm
      Mouldboard height 610 mm and 1067 mm
      Mouldboard thickness 22 mm and 50 mm
      Left lateral displacement 510 mm and 870 mm
      Lateral right shift 660 mm and 1244 mm

      Circle

      Diameter 1530 mm and 2631 mm
      Left shift 695 mm and 804 mm
      Right shift 728 mm and 437 mm
      Blade tilt front angle 40 degrees and 40 degrees

      Images

      Sizes

      1. Dimensional length 8713 mm 1. Dimensional length 14194 mm
      2. Between tyres width 2493 mm 2. Between tyres width 4280 mm
      3. Height to cab upper part 3293 mm 3. Height to cab upper part 4352 mm
      4. Wheelbase 6121 mm 4. Wheelbase 10278 mm
      5. Rear ground clearance 341 mm 5. Rear ground clearance 507 mm
      6. Front part clearance 571 mm 6. Front part clearance 858 mm
      7. Dual axis wheelbase 1523 mm 7. Dual axis wheelbase 2285 mm
      8. Blade base 2552 mm 8. Blade base 4048 mm