vs.

      Caterpillar 140M vs. John Deere 770AH

      16 reasons to buy Caterpillar 140M:

      Operation

      Cooling system fluid volume 47 l. and 26.5 l. 44 % more or 20.5 l.
      Front axle standard operating weight 4161 kg and 3877.3 kg 7 % more or 283.7 kg
      Rear axle standard operating weight 10969 kg and 9848.4 kg 10 % more or 1120.6 kg
      Circular gearbox fluid volume 7 l. and 3.8 l. 46 % more or 3.2 l.
      Front axle maximum operating weight 8123 kg and 4123.6 kg 49 % more or 3999.4 kg
      Each tandem case fluid volume 64 l. and 18.9 l. 70 % more or 45.1 l.
      Rear axle maximum operating weight 14954 kg and 11230 kg 25 % more or 3724 kg
      Fuel Capacity 416 l. and 265 l. 36 % more or 151 l.

      Motor

      Effective speeds output 7-8 136.5 kW and 134.2 kW 2 % more or 2.3 kW
      Maximum power 136.5 kW and 134.2 kW 2 % more or 2.3 kW

      Gear box

      Maximum reverse gear 36.8 km/h and 13.8 km/h 62 % more or 23.0 km/h
      Reverse gears number 6 and 4 33 % more or 2
      Maximum forward speed 46.6 km/h and 40.4 km/h 13 % more or 6.2 km/h

      Circle

      Maximum radius outside left tyres 1790 mm and 2280 mm 21 % less or 490 mm
      Right maximum radius outside tyres 1978 mm and 2250 mm 12 % less or 272 mm
      Maximum lifting above ground level 480 mm and 432 mm 10 % more or 48 mm

      9 reasons to buy John Deere 770AH:

      Steerage

      Turn radius 6.7 m and 7.8 m 14 % less or 1.1 m

      Sizes

      Front part clearance 572 mm and 571 mm 0 % more or 1 mm

      Operation

      Hydraulic system fluid volume 117.3 l. and 60 l. 49 % more or 57.3 l.

      Motor

      Power measured at 2200 rev / min and 2000 rev / min 9 % more or 200 rev
      Displacement 7.6 l. and 7.2 l. 5 % more or 0.4 l.

      Hydraulic system

      Pump flow rate 136.3 l/min and 210 l/min 35 % less or 73.7 l/min

      Front Axle

      Clearance 572 mm and 571 mm 0 % more or 1 mm

      Circle

      Blade tilt front angle 44 degrees and 40 degrees 9 % more or 4 degrees
      Blade tilt rear angle 10 degrees and 5 degrees 50 % more or 5 degrees

      Neutral reasons:

      Steerage

      Left and right hinge connection 20 degrees and 25 degrees

      Sizes

      Blade base 2552 mm and 2720 mm
      Dual axis wheelbase 1523 mm and 1540 mm
      Height to cab upper part 3293 mm and 3200 mm
      Dimensional length 8713 mm and 8470 mm
      Between tyres width 2493 mm and 2440 mm
      Wheelbase 6121 mm and 5970 mm

      Operation

      Overall standard operating weight 15130 kg and 13725.7 kg
      Total maximum operating weight 23077 kg and 15353.6 kg

      Motor

      Manufacturer Caterpillar and John Deere
      Model C7 ACERT VHP and 6-466A
      Cylinders number 6 and 6

      Hydraulic system

      Type of pump variable displacement piston pump and Constant pressure system with locking in the middle position, with the piston pump of variable displacement volume

      Gear box

      Transmission type direct drive, powershift, camshaft and powershift
      Forward gears number 8 and 8

      Front Axle

      Wheel tilt 18 degrees and 20 degrees
      General fluctuations 32 degrees and 30 degrees

      Dump

      Mouldboard width 3700 mm and 3657.6 mm
      Mouldboard height 610 mm and 609.6 mm
      Mouldboard thickness 22 mm and 22.4 mm
      Left lateral displacement 510 mm and 683 mm
      Lateral right shift 660 mm and 683 mm

      Circle

      Right shift 728 mm and 813 mm
      Diameter 1530 mm and 1500 mm
      Left shift 695 mm and 851 mm

      Images

      Sizes

      1. Dimensional length 8713 mm 1. Dimensional length 8470 mm
      2. Between tyres width 2493 mm 2. Between tyres width 2440 mm
      3. Height to cab upper part 3293 mm 3. Height to cab upper part 3200 mm
      4. Wheelbase 6121 mm 4. Wheelbase 5970 mm
      6. Front part clearance 571 mm 6. Front part clearance 572 mm
      7. Dual axis wheelbase 1523 mm 7. Dual axis wheelbase 1540 mm
      8. Blade base 2552 mm 8. Blade base 2720 mm