vs.

      Caterpillar 140M vs. Volvo G710B

      14 reasons to buy Caterpillar 140M:

      Operation

      Rear axle standard operating weight 10969 kg and 10757 kg 2 % more or 212 kg
      Fuel Capacity 416 l. and 378.5 l. 9 % more or 37.5 l.
      Rear differential/final drive fluid volume 65 l. and 23 l. 65 % more or 42 l.

      Motor

      Displacement 7.2 l. and 7.1 l. 1 % more or 0.1 l.
      Maximum power 136.5 kW and 129 kW 5 % more or 7.5 kW
      Effective speeds output 7-8 136.5 kW and 129 kW 5 % more or 7.5 kW

      Hydraulic system

      Pump flow rate 210 l/min and 284 l/min 26 % less or 74 l/min

      Gear box

      Reverse gears number 6 and 4 33 % more or 2
      Maximum forward speed 46.6 km/h and 40.1 km/h 14 % more or 6.5 km/h
      Maximum reverse gear 36.8 km/h and 28.6 km/h 22 % more or 8.2 km/h

      Dump

      Blade pulling at maximum weight 20769 kg and 9143.1 kg 56 % more or 11625.9 kg

      Circle

      Maximum radius outside left tyres 1790 mm and 2019.3 mm 11 % less or 229.3 mm
      Right maximum radius outside tyres 1978 mm and 2044.7 mm 3 % less or 66.7 mm
      Maximum lifting above ground level 480 mm and 431.8 mm 10 % more or 48.2 mm

      7 reasons to buy Volvo G710B:

      Operation

      Front axle standard operating weight 4394 kg and 4161 kg 5 % more or 233 kg
      Hydraulic system fluid volume 134 l. and 60 l. 55 % more or 74 l.
      Each tandem case fluid volume 100 l. and 64 l. 36 % more or 36 l.

      Motor

      Power measured at 2200 rev / min and 2000 rev / min 9 % more or 200 rev

      Front Axle

      Clearance 597 mm and 571 mm 4 % more or 26 mm

      Dump

      Maximum cutting depth 812.8 mm and 715 mm 12 % more or 97.8 mm

      Circle

      Blade tilt front angle 47 degrees and 40 degrees 15 % more or 7 degrees

      Neutral reasons:

      Steerage

      Left and right hinge connection 20 degrees and 22 degrees

      Sizes

      Height to cab upper part 3293 mm and 3073 mm
      Dimensional length 8713 mm and 9093 mm
      Between tyres width 2493 mm and 2489 mm
      Wheelbase 6121 mm and 6096 mm
      Blade base 2552 mm and 2616 mm

      Operation

      Overall standard operating weight 15130 kg and 15150 kg
      Cooling system fluid volume 47 l. and 47 l.

      Motor

      Manufacturer Caterpillar and Volvo
      Model C7 ACERT VHP and D7DGAE2

      Hydraulic system

      Type of pump variable displacement piston pump and hydraulic system with load sensing
      Overflow valve pressure 24150 kPa and 18615.8 kPa

      Gear box

      Transmission type direct drive, powershift, camshaft and powershift transmission
      Forward gears number 8 and 8

      Front Axle

      Wheel tilt 18 degrees and 18 degrees
      General fluctuations 32 degrees and 16 degrees

      Dump

      Lateral right shift 660 mm and 673.1 mm
      Mouldboard width 3700 mm and 3657.6 mm
      Mouldboard height 610 mm and 635 mm
      Mouldboard thickness 22 mm and 22.2 mm
      Left lateral displacement 510 mm and 673.1 mm

      Circle

      Left shift 695 mm and 774.7 mm
      Blade tilt rear angle 5 degrees and 5 degrees
      Right shift 728 mm and 749.3 mm
      Diameter 1530 mm and 1683 mm

      Images

      Sizes

      3. Height to cab upper part 3293 mm 3. Height to cab upper part 3073 mm
      4. Wheelbase 6121 mm 4. Wheelbase 6096 mm
      8. Blade base 2552 mm 8. Blade base 2616 mm
      1. Dimensional length 8713 mm 1. Dimensional length 9093 mm
      2. Between tyres width 2493 mm 2. Between tyres width 2489 mm