vs.

      Caterpillar 160M2 AWD vs. Caterpillar 14M

      12 reasons to buy Caterpillar 160M2 AWD:

      Steerage

      Turn radius 7.8 m and 7.9 m 1 % less or 0.1 m

      Operation

      Cooling system fluid volume 56 l. and 46.5 l. 17 % more or 9.5 l.
      Circular gearbox fluid volume 6.8 l. and 6 l. 12 % more or 0.8 l.
      Hydraulic system fluid volume 99.9 l. and 60 l. 40 % more or 39.9 l.
      Front axle standard operating weight 5805.1 kg and 5720 kg 1 % more or 85.1 kg

      Motor

      Power measured at 2100 rev / min and 1800 rev / min 14 % more or 300 rev
      Effective speeds output 7-8 211 kW and 204.3 kW 3 % more or 6.7 kW

      Hydraulic system

      Pump flow rate 210.1 l/min and 280 l/min 25 % less or 69.9 l/min

      Dump

      Maximum cutting depth 750 mm and 438 mm 42 % more or 312 mm

      Circle

      Maximum radius outside left tyres 2090 mm and 2169 mm 4 % less or 79 mm
      Right maximum radius outside tyres 2278 mm and 2279 mm 0 % less or 1 mm
      Maximum lifting above ground level 452 mm and 419 mm 7 % more or 33 mm

      10 reasons to buy Caterpillar 14M:

      Sizes

      Rear ground clearance 383 mm and 344 mm 10 % more or 39 mm

      Operation

      Each tandem case fluid volume 96.5 l. and 64 l. 34 % more or 32.5 l.
      Transmission fluid volume 89 l. and 65.1 l. 27 % more or 23.9 l.
      Rear axle standard operating weight 15659 kg and 14707.3 kg 6 % more or 951.7 kg
      Front axle maximum operating weight 9939 kg and 6052.3 kg 39 % more or 3886.7 kg
      Rear axle maximum operating weight 19997 kg and 16530.7 kg 17 % more or 3466.3 kg
      Fuel Capacity 492 l. and 416.4 l. 15 % more or 75.6 l.

      Gear box

      Maximum forward speed 49.8 km/h and 46.7 km/h 6 % more or 3.1 km/h
      Maximum reverse gear 39.4 km/h and 36.9 km/h 6 % more or 2.5 km/h

      Dump

      Blade pulling at maximum weight 17997 kg and 9091.8 kg 49 % more or 8905.2 kg

      Neutral reasons:

      Steerage

      Left and right hinge connection 20 degrees and 20 degrees

      Sizes

      Dual axis wheelbase 1523 mm and 1656 mm
      Height to cab upper part 3287 mm and 3535 mm
      Dimensional length 8898 mm and 9412 mm
      Between tyres width 2581 mm and 2791 mm
      Wheelbase 6126 mm and 6559 mm
      Blade base 2557 mm and 2842 mm

      Operation

      Overall standard operating weight 20511.9 kg and 21379 kg
      Total maximum operating weight 23947.4 kg and 29936 kg

      Motor

      Manufacturer Caterpillar and Caterpillar
      Cylinders number 6 and 6
      Model C9.3 ACERT VHP and C11 ACERT VHP

      Hydraulic system

      Type of pump variable displacement piston pump and variable displacement piston pump
      Overflow valve pressure 24152.3 kPa and 24150 kPa

      Gear box

      Transmission type Powershift transmission with direct drive and direct drive, powershift, camshaft
      Forward gears number 8 and 8
      Reverse gears number 6 and 6

      Front Axle

      Wheel tilt 18 degrees and 17.1 degrees
      General fluctuations 32 degrees and 32 degrees

      Dump

      Mouldboard thickness 22 mm and 25 mm
      Lowered blade pressure 10380 kg and 17539 kg
      Left lateral displacement 510 mm and 740 mm
      Lateral right shift 660 mm and 790 mm
      Mouldboard width 4267.2 mm and 4267 mm
      Mouldboard height 609.6 mm and 688 mm

      Circle

      Diameter 1530 mm and 1822 mm
      Left shift 695 mm and 650 mm
      Right shift 728 mm and 520 mm
      Blade tilt front angle 40 degrees and 40 degrees
      Blade tilt rear angle 5 degrees and 5 degrees

      Images

      Sizes

      2. Between tyres width 2581 mm 2. Between tyres width 2791 mm
      3. Height to cab upper part 3287 mm 3. Height to cab upper part 3535 mm
      4. Wheelbase 6126 mm 4. Wheelbase 6559 mm
      5. Rear ground clearance 344 mm 5. Rear ground clearance 383 mm
      7. Dual axis wheelbase 1523 mm 7. Dual axis wheelbase 1656 mm
      8. Blade base 2557 mm 8. Blade base 2842 mm
      1. Dimensional length 8898 mm 1. Dimensional length 9412 mm