vs.

      Caterpillar 16H vs. Dressta RD200C

      14 reasons to buy Caterpillar 16H:

      Steerage

      Turn radius 8.2 m and 7500 m 100 % less or 7491.8 m

      Operation

      Each tandem case fluid volume 121 l. and 30 l. 75 % more or 91 l.
      Fuel Capacity 492 l. and 380 l. 23 % more or 112 l.
      Cooling system fluid volume 46.5 l. and 40 l. 14 % more or 6.5 l.
      Rear differential/final drive fluid volume 114 l. and 7.5 l. 93 % more or 106.5 l.

      Motor

      Displacement 11.9 l. and 6.7 l. 44 % more or 5.2 l.
      Effective speeds output 5-6 212.5 kW and 132.7 kW 38 % more or 79.8 kW
      Maximum power 212.5 kW and 132.7 kW 38 % more or 79.8 kW

      Gear box

      Forward gears number 8 and 6 25 % more or 2
      Reverse gears number 8 and 3 62 % more or 5
      Maximum forward speed 48.1 km/h and 44.7 km/h 7 % more or 3.4 km/h
      Maximum reverse gear 45.7 km/h and 31.4 km/h 31 % more or 14.3 km/h

      Front Axle

      Clearance 732 mm and 550 mm 25 % more or 182 mm

      Dump

      Maximum cutting depth 470 mm and 350 mm 26 % more or 120 mm

      4 reasons to buy Dressta RD200C:

      Operation

      Hydraulic system fluid volume 130 l. and 129 l. 1 % more or 1 l.

      Motor

      Power measured at 2400 rev / min and 2000 rev / min 17 % more or 400 rev

      Hydraulic system

      Pump flow rate 80 l/min and 254 l/min 69 % less or 174 l/min

      Circle

      Maximum lifting above ground level 500 mm and 419 mm 16 % more or 81 mm

      Neutral reasons:

      Steerage

      Left and right hinge connection 20 degrees and 25 degrees

      Sizes

      Dimensional length 9994 mm and 9540 mm
      Between tyres width 3077 mm and 2500 mm
      Wheelbase 6960 mm and 7300 mm
      Blade base 3071 mm and 3050 mm
      Dual axis wheelbase 1841 mm and 1540 mm
      Height to cab upper part 3524 mm and 3300 mm

      Operation

      Operating voltage 24 V and 24 V
      Generator current strength 75 amperes and 75 amperes
      Overall standard operating weight 24740 kg and 36376 kg

      Motor

      Manufacturer Caterpillar and Cummins
      Model 3196 ETA and QSB 6.7
      Cylinders number 6 and 6

      Hydraulic system

      Type of pump axial piston and axial piston pump
      Overflow valve pressure 24150 kPa and 14000 kPa

      Gear box

      Transmission type direct drive, powershift, of planetary type and powershift transmission

      Front Axle

      Wheel tilt 18 degrees and 22 degrees
      General fluctuations 32 degrees and 40 degrees

      Dump

      Mouldboard width 4877 mm and 3660 mm
      Mouldboard height 787 mm and 670 mm
      Mouldboard thickness 25 mm and 22 mm
      Left lateral displacement 650 mm and 800 mm
      Lateral right shift 790 mm and 800 mm

      Circle

      Diameter 1822 mm and 1350 mm

      Images

      Sizes

      1. Dimensional length 9994 mm 1. Dimensional length 9540 mm
      2. Between tyres width 3077 mm 2. Between tyres width 2500 mm
      3. Height to cab upper part 3524 mm 3. Height to cab upper part 3300 mm
      4. Wheelbase 6960 mm 4. Wheelbase 7300 mm
      7. Dual axis wheelbase 1841 mm 7. Dual axis wheelbase 1540 mm
      8. Blade base 3071 mm 8. Blade base 3050 mm