- Home/
- Comparison/
- Grader/
- Caterpillar 16H vs. John Deere JD570
Caterpillar 16H vs. John Deere JD570
19 reasons to buy Caterpillar 16H:
Sizes
Front part clearance | 732 mm and 597.4 mm | 18 % more or 134.6 mm |
Operation
Front axle maximum operating weight | 8846 kg and 2630.8 kg | 70 % more or 6215.2 kg |
Rear axle maximum operating weight | 22746 kg and 6168.9 kg | 73 % more or 16577.1 kg |
Front axle standard operating weight | 6982 kg and 2494.8 kg | 64 % more or 4487.2 kg |
Rear axle standard operating weight | 17758 kg and 5715.3 kg | 68 % more or 12042.7 kg |
Fuel Capacity | 492 l. and 189.3 l. | 62 % more or 302.7 l. |
Cooling system fluid volume | 46.5 l. and 20.8 l. | 55 % more or 25.7 l. |
Hydraulic system fluid volume | 129 l. and 79.5 l. | 38 % more or 49.5 l. |
Circular gearbox fluid volume | 8 l. and 5.7 l. | 29 % more or 2.3 l. |
Each tandem case fluid volume | 121 l. and 18.9 l. | 84 % more or 102.1 l. |
Motor
Maximum power | 212.5 kW and 61.9 kW | 71 % more or 150.6 kW |
Effective drives torque 7-8 | 1550 Nm and 287.4 Nm | 81 % more or 1262.6 Nm |
Displacement | 11.9 l. and 5 l. | 58 % more or 6.9 l. |
Effective speeds output 7-8 | 212.5 kW and 61.9 kW | 71 % more or 150.6 kW |
Gear box
Reverse gears number | 8 and 4 | 50 % more or 4 |
Maximum forward speed | 48.1 km/h and 34.4 km/h | 28 % more or 13.7 km/h |
Maximum reverse gear | 45.7 km/h and 10.9 km/h | 76 % more or 34.8 km/h |
Front Axle
Clearance | 732 mm and 597.4 mm | 18 % more or 134.6 mm |
Circle
Maximum lifting above ground level | 419 mm and 311.2 mm | 26 % more or 107.8 mm |
3 reasons to buy John Deere JD570:
Steerage
Turn radius | 5.5 m and 8.2 m | 33 % less or 2.7 m |
Motor
Power measured at | 2300 rev / min and 2000 rev / min | 13 % more or 300 rev |
Hydraulic system
Pump flow rate | 101.8 l/min and 254 l/min | 60 % less or 152.2 l/min |
Neutral reasons:
Steerage
Left and right hinge connection | 20 degrees and 22 degrees |
Sizes
Between tyres width | 3077 mm and 2386.6 mm |
Wheelbase | 6960 mm and 5282.2 mm |
Blade base | 3071 mm and 2337.8 mm |
Dual axis wheelbase | 1841 mm and 1447.8 mm |
Height to cab upper part | 3524 mm and 3200.4 mm |
Dimensional length | 9994 mm and 7415.8 mm |
Operation
Overall standard operating weight | 24740 kg and 9197.9 kg |
Total maximum operating weight | 31592 kg and 8210 kg |
Operating voltage | 24 V and 12 V |
Motor
Manufacturer | Caterpillar and John Deere |
Hydraulic system
Type of pump | axial piston and piston pump |
Overflow valve pressure | 24150 kPa and 13789.5 kPa |
Gear box
Transmission type | direct drive, powershift, of planetary type and powershift |
Forward gears number | 8 and 8 |
Front Axle
Wheel tilt | 18 degrees and 20 degrees |
General fluctuations | 32 degrees and 30 degrees |
Dump
Left lateral displacement | 650 mm and 679.5 mm |
Mouldboard thickness | 25 mm and 15.7 mm |
Lateral right shift | 790 mm and 793.8 mm |
Mouldboard width | 4877 mm and 3657.6 mm |
Mouldboard height | 787 mm and 609.6 mm |
Circle
Diameter | 1822 mm and 1371.6 mm |
Images
Sizes
1. Dimensional length | 9994 mm | 1. Dimensional length | 7415.8 mm |
2. Between tyres width | 3077 mm | 2. Between tyres width | 2386.6 mm |
3. Height to cab upper part | 3524 mm | 3. Height to cab upper part | 3200.4 mm |
4. Wheelbase | 6960 mm | 4. Wheelbase | 5282.2 mm |
6. Front part clearance | 732 mm | 6. Front part clearance | 597.4 mm |
7. Dual axis wheelbase | 1841 mm | 7. Dual axis wheelbase | 1447.8 mm |
8. Blade base | 3071 mm | 8. Blade base | 2337.8 mm |