vs.

      Caterpillar 16M vs. Caterpillar 140H

      22 reasons to buy Caterpillar 16M:

      Sizes

      Rear ground clearance 407 mm and 344 mm 15 % more or 63 mm
      Front part clearance 688 mm and 600 mm 13 % more or 88 mm

      Operation

      Rear axle standard operating weight 18948 kg and 10539 kg 44 % more or 8409 kg
      Rear differential/final drive fluid volume 114 l. and 47 l. 59 % more or 67 l.
      Circular gearbox fluid volume 8 l. and 7 l. 12 % more or 1 l.
      Front axle maximum operating weight 10919 kg and 7590 kg 30 % more or 3329 kg
      Each tandem case fluid volume 121.5 l. and 64 l. 47 % more or 57.5 l.
      Rear axle maximum operating weight 24753 kg and 13671 kg 45 % more or 11082 kg
      Fuel Capacity 511 l. and 397 l. 22 % more or 114 l.
      Cooling system fluid volume 46.5 l. and 38 l. 18 % more or 8.5 l.
      Front axle standard operating weight 7112 kg and 4138 kg 42 % more or 2974 kg
      Hydraulic system fluid volume 114 l. and 80 l. 30 % more or 34 l.

      Motor

      Effective speeds output 5-6 232.7 kW and 138 kW 41 % more or 94.7 kW
      Effective speeds output 7-8 232.7 kW and 138 kW 41 % more or 94.7 kW
      Maximum power 232.7 kW and 138 kW 41 % more or 94.7 kW
      Displacement 12.5 l. and 10.3 l. 18 % more or 2.2 l.
      Effective speeds output 1-2 225 kW and 123 kW 45 % more or 102 kW
      Effective speeds output 3-4 232.7 kW and 138 kW 41 % more or 94.7 kW

      Gear box

      Maximum forward speed 53.9 km/h and 44 km/h 18 % more or 9.9 km/h
      Maximum reverse gear 42.6 km/h and 34.7 km/h 19 % more or 7.9 km/h

      Front Axle

      Clearance 688 mm and 600 mm 13 % more or 88 mm

      Dump

      Blade pulling at maximum weight 22297 kg and 19135 kg 14 % more or 3162 kg

      6 reasons to buy Caterpillar 140H:

      Steerage

      Turn radius 7.5 m and 8.9 m 16 % less or 1.4 m

      Hydraulic system

      Pump flow rate 206 l/min and 280 l/min 26 % less or 74 l/min

      Dump

      Maximum cutting depth 715 mm and 488 mm 32 % more or 227 mm

      Circle

      Right maximum radius outside tyres 1978 mm and 2587 mm 24 % less or 609 mm
      Maximum lifting above ground level 480 mm and 395 mm 18 % more or 85 mm
      Maximum radius outside left tyres 1896 mm and 2282 mm 17 % less or 386 mm

      Neutral reasons:

      Steerage

      Left and right hinge connection 20 degrees and 20 degrees

      Sizes

      Dual axis wheelbase 1841 mm and 1523 mm
      Height to cab upper part 3703 mm and 3131 mm
      Dimensional length 9963 mm and 8713 mm
      Between tyres width 3095 mm and 2464 mm
      Wheelbase 6985 mm and 6169 mm
      Blade base 3069 mm and 2561 mm

      Operation

      Overall standard operating weight 26060 kg and 14677 kg
      Total maximum operating weight 35672 kg and 21261 kg

      Motor

      Power measured at 2000 rev / min and 2000 rev / min
      Cylinders number 6 and 6
      Manufacturer Caterpillar and Caterpillar
      Model C13 ACERT VHP and 3176C DITA ATAAC VHP

      Hydraulic system

      Type of pump variable displacement piston pump and axial piston
      Overflow valve pressure 24150 kPa and 24150 kPa

      Gear box

      Reverse gears number 6 and 6
      Transmission type direct drive, powershift, camshaft and powershift transmission with direct drive
      Forward gears number 8 and 8

      Front Axle

      Wheel tilt 18.2 degrees and 18 degrees
      General fluctuations 32 degrees and 32 degrees

      Dump

      Lateral right shift 1094 mm and 660 mm
      Lowered blade pressure 19485 kg and 13017 kg
      Mouldboard width 4877 mm and 3658 mm
      Mouldboard height 787 mm and 610 mm
      Mouldboard thickness 25 mm and 22 mm
      Left lateral displacement 740 mm and 524 mm

      Circle

      Blade tilt front angle 40 degrees and 40 degrees
      Blade tilt rear angle 5 degrees and 5 degrees
      Diameter 1822 mm and 1530 mm
      Left shift 647 mm and 695 mm
      Right shift 597 mm and 728 mm

      Images

      Sizes

      1. Dimensional length 9963 mm 1. Dimensional length 8713 mm
      2. Between tyres width 3095 mm 2. Between tyres width 2464 mm
      3. Height to cab upper part 3703 mm 3. Height to cab upper part 3131 mm
      4. Wheelbase 6985 mm 4. Wheelbase 6169 mm
      5. Rear ground clearance 407 mm 5. Rear ground clearance 344 mm
      6. Front part clearance 688 mm 6. Front part clearance 600 mm
      7. Dual axis wheelbase 1841 mm 7. Dual axis wheelbase 1523 mm
      8. Blade base 3069 mm 8. Blade base 2561 mm