vs.

      Caterpillar 16M vs. John Deere 670C

      19 reasons to buy Caterpillar 16M:

      Sizes

      Front part clearance 688 mm and 610 mm 11 % more or 78 mm

      Operation

      Front axle standard operating weight 7112 kg and 3919 kg 45 % more or 3193 kg
      Rear differential/final drive fluid volume 114 l. and 36 l. 68 % more or 78 l.
      Rear axle standard operating weight 18948 kg and 9913 kg 48 % more or 9035 kg
      Circular gearbox fluid volume 8 l. and 3.8 l. 52 % more or 4.2 l.
      Front axle maximum operating weight 10919 kg and 4427 kg 59 % more or 6492 kg
      Rear axle maximum operating weight 24753 kg and 11551 kg 53 % more or 13202 kg
      Each tandem case fluid volume 121.5 l. and 75 l. 38 % more or 46.5 l.
      Fuel Capacity 511 l. and 403 l. 21 % more or 108 l.
      Cooling system fluid volume 46.5 l. and 42 l. 10 % more or 4.5 l.
      Hydraulic system fluid volume 114 l. and 59 l. 48 % more or 55 l.

      Motor

      Displacement 12.5 l. and 6.8 l. 46 % more or 5.7 l.
      Effective speeds output 7-8 232.7 kW and 104.4 kW 55 % more or 128.3 kW
      Maximum power 232.7 kW and 104.4 kW 55 % more or 128.3 kW
      Effective drives torque 7-8 1710 Nm and 672.5 Nm 61 % more or 1037.5 Nm

      Gear box

      Maximum forward speed 53.9 km/h and 40.2 km/h 25 % more or 13.7 km/h
      Maximum reverse gear 42.6 km/h and 40.2 km/h 6 % more or 2.4 km/h

      Front Axle

      Clearance 688 mm and 610 mm 11 % more or 78 mm

      Dump

      Blade pulling at maximum weight 22297 kg and 10998.7 kg 51 % more or 11298.3 kg

      7 reasons to buy John Deere 670C:

      Steerage

      Turn radius 6.7 m and 8.9 m 25 % less or 2.2 m

      Hydraulic system

      Pump flow rate 173 l/min and 280 l/min 38 % less or 107 l/min

      Gear box

      Reverse gears number 8 and 6 25 % more or 2

      Circle

      Maximum radius outside left tyres 2160 mm and 2282 mm 5 % less or 122 mm
      Right maximum radius outside tyres 2110 mm and 2587 mm 18 % less or 477 mm
      Maximum lifting above ground level 444 mm and 395 mm 11 % more or 49 mm
      Blade tilt front angle 49 degrees and 40 degrees 18 % more or 9 degrees

      Neutral reasons:

      Steerage

      Left and right hinge connection 20 degrees and 25 degrees

      Sizes

      Height to cab upper part 3703 mm and 3100 mm
      Dimensional length 9963 mm and 8580 mm
      Between tyres width 3095 mm and 2490 mm
      Wheelbase 6985 mm and 5970 mm
      Blade base 3069 mm and 2670 mm
      Dual axis wheelbase 1841 mm and 1540 mm

      Operation

      Overall standard operating weight 26060 kg and 13832 kg
      Total maximum operating weight 35672 kg and 15977 kg
      Tyre size 18.00-25 12PR (G-2) and 13.00-24

      Motor

      Cylinders number 6 and 6
      Manufacturer Caterpillar and John Deere
      Model C13 ACERT VHP and 6068H
      Power measured at 2000 rev / min and 2000 rev / min

      Hydraulic system

      Type of pump variable displacement piston pump and variable displacement with locking in the middle position
      Overflow valve pressure 24150 kPa and 17581.6 kPa

      Gear box

      Transmission type direct drive, powershift, camshaft and powershift
      Forward gears number 8 and 8

      Front Axle

      Wheel tilt 18.2 degrees and 20 degrees
      General fluctuations 32 degrees and 32 degrees

      Dump

      Mouldboard width 4877 mm and 3.7 mm
      Mouldboard height 787 mm and 610 mm
      Mouldboard thickness 25 mm and 22 mm
      Left lateral displacement 740 mm and 683 mm
      Lateral right shift 1094 mm and 683 mm

      Circle

      Blade tilt rear angle 5 degrees and 5 degrees
      Diameter 1822 mm and 1520 mm
      Left shift 647 mm and 787 mm
      Right shift 597 mm and 724 mm

      Images

      Sizes

      1. Dimensional length 9963 mm 1. Dimensional length 8580 mm
      2. Between tyres width 3095 mm 2. Between tyres width 2490 mm
      3. Height to cab upper part 3703 mm 3. Height to cab upper part 3100 mm
      4. Wheelbase 6985 mm 4. Wheelbase 5970 mm
      6. Front part clearance 688 mm 6. Front part clearance 610 mm
      7. Dual axis wheelbase 1841 mm 7. Dual axis wheelbase 1540 mm
      8. Blade base 3069 mm 8. Blade base 2670 mm