vs.

      Case 580 Super M+ vs. Caterpillar 430D

      10 reasons to buy Case 580 Super M+:

      Sizes

      Clearance 366 mm and 297 mm 19 % more or 69 mm

      Operation

      Fuel Capacity 159 l. and 128 l. 19 % more or 31 l.
      Turn radius 3425 mm and 5400 mm 37 % less or 1975 mm

      Motor

      Displacement 4.5 l. and 4 l. 11 % more or 0.5 l.

      Load-transfer device

      Bucket breakout force 40.8 kN and 45.7 kN 11 % less or 4.9 kN
      Ground clearance at maximum unloading height 2800 mm and 2575 mm 8 % more or 225 mm

      Gear box

      Maximum forward speed 42.6 km/h and 33.7 km/h 21 % more or 8.9 km/h
      Maximum reverse gear 51.5 km/h and 33.7 km/h 35 % more or 17.8 km/h

      Backdigger

      Radius at high-altitude loading in folded state 2670 mm and 1823 mm 32 % more or 847 mm
      Radius at high-altitude loading in unfolded state 3500 mm and 3076 mm 12 % more or 424 mm

      10 reasons to buy Caterpillar 430D:

      Motor

      Full power 73.1 kW and 71 kW 3 % more or 2.1 kW
      Effective power 70.1 kW and 67 kW 4 % more or 3.1 kW

      Load-transfer device

      Lifting capacity at full height 2898 kg and 2804 kg 3 % more or 94 kg
      Radius at max unloading height 802 mm and 763 mm 5 % more or 39 mm
      Digging depth 135 mm and 33 mm 76 % more or 102 mm

      Hydraulic system

      Pump bandwidth 163 l/min and 144 l/min 12 % more or 19 l/min

      Backdigger

      Loading height in folded state 3841 mm and 3400 mm 11 % more or 441 mm
      Loading height in unfolded state 4581 mm and 4040 mm 12 % more or 541 mm
      Digging depth in folded state 4639 mm and 4390 mm 5 % more or 249 mm
      Digging depth in unfolded state 6079 mm and 5560 mm 9 % more or 519 mm

      Neutral reasons:

      Sizes

      Transport width 2360 mm and 2352 mm
      Transport height 4360 mm and 3770 mm
      Height to cab upper part 2730 mm and 2770 mm
      Wheelbase 2150 mm and 2100 mm
      Transport length 6950 mm and 7334 mm

      Operation

      Rear tyres size 2wd/4wd 21Lx24/21Lx24 and 12.5/80x18,10PR / 19.5x24,10PR
      Front tyres size 2wd / 4wd 14.5x16.1/12.5x16.5 and 11Lx16,12PR / 12.5/80x18,10PR

      Motor

      Manufacturer Case and Caterpillar
      Cylinders number 4 and 4
      Model Family III 445T/M2, 2 level and 3054T
      Power measured at 2200 rev / min and 2200 rev / min

      Load-transfer device

      Shovel width 2360 mm and 2406 mm

      Hydraulic system

      Type of pump series coupling of gear type, actuated by transmission and load sensing, pressure control, with locking in the middle position
      Overflow valve pressure 0 kPa and 22754 kPa

      Gear box

      Transmission type 4-speed synchronized mesh with power hydraulic clutches and servodrive
      Forward gears number 4 and 4
      Reverse gears number 4 and 4

      Backdigger

      Hinge joint radius in folded state 5510 mm and 7062 mm
      Hinge joint radius in unfolded state 6650 mm and 8393 mm

      Images

      Sizes

      1. Transport length 6950 mm 1. Transport length 7334 mm
      2. Transport width 2360 mm 2. Transport width 2352 mm
      3. Transport height 4360 mm 3. Transport height 3770 mm
      4. Wheelbase 2150 mm 4. Wheelbase 2100 mm
      5. Clearance 366 mm 5. Clearance 297 mm
      6. Height to cab upper part 2730 mm 6. Height to cab upper part 2770 mm

      Load-transfer device

      9. Digging depth 33 mm 9. Digging depth 135 mm
      7. Ground clearance at maximum unloading height 2800 mm 7. Ground clearance at maximum unloading height 2575 mm
      8. Radius at max unloading height 763 mm 8. Radius at max unloading height 802 mm

      Backdigger

      10. Loading height in folded state 3400 mm 10. Loading height in folded state 3841 mm
      11. Hinge joint radius in folded state 5510 mm 11. Hinge joint radius in folded state 7062 mm
      12. Digging depth in folded state 4390 mm 12. Digging depth in folded state 4639 mm
      13. Radius at high-altitude loading in folded state 2670 mm 13. Radius at high-altitude loading in folded state 1823 mm